1/4
mpa M.A.R.L.I.S. 2.0 MK III Active PA speaker set
EAN:
Part number:
Item no:
Highlights & Details
MPA M.A.R.L.I.S. 2.0 MK III active PA-system
- 3-channel end-stage RMS/max. 400/800 W
- New, powerful 2.5 cm (1") high-frequency drivers
- Now with in-built limiters
Technical specifications
- Subwoofer: 38 cm (15") bass loudspeaker
- Frequency response 35 - 130 Hz
- Dim. (H x W x D) 450 x 556 x 600 mm
- Satellites: 20 cm (8")-mid-range frequency
- 2.5 cm (1")-dynamic tweeter horn
- Frequency response 130 – 20 000 Hz
- Dim. (W x H x D) 280 x 415 x 240 mm.
- Speaker size (inch) (subwoofer)
15 inch
- Speaker size (cm) (subwoofer)
38 cm
- RMS power (subwoofer)
400 W
- Power (max.) (subwoofer)
800 W
- Min. frequency (subwoofer)
35 Hz
- Frequency (max.)(subwoofer)
130 Hz
- Speaker size (inch) (satellite)
8 inch
- Speaker size (cm)
20 cm
- Min. frequency
130 Hz
- Max. frequency (satellite)
20000 Hz
- Max. sound pressure
122 dB
- Output rating
RMS/max. Voltage: 400/800 W
- Max SPL (per channel)
122 dB
- Product type
Active PA speaker set
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 304978 mpa M.A.R.L.I.S. 2.0 MK III Active PA speaker set
Description
A tested model without compromises, to build full-fledged PA-systems, hides the 2.1-technology. Here, each 1 subwoofer and 2 satellites are fired with an amplifier constructed for it. This special tuning causes a high power efficiency and optimum sound performance. Who does not know the problem as musician or DJ: The installation is too time consuming and the PA-equipment is not handy. The MPA-system brings an end to this. A normal-sized car boot area and only a few cable connections are needed to set up an assertive PA-sound system. Both the systems have been revised completely - acoustically as well as optically. New powerful 2.5 cm (1")-high frequency drivers were integrated in the satellites, the woofers were optimised and the amping was fitted with limiters. These steps make the system more powerful, safer and acoustically more impressive.
Features
- Vibration-free metallic grid (satellites and subwoofers)
- Air-tight recessed grips
- Stable and robust subwoofer guide-rolls (2 can be locked)
- Aluminium box flange
- Sturdy carpet surface
- Powerful dynamic 2.5 cm (1") high-frequency drivers
- SPK-connection terminal (satelittes)
- Phono, audio-input sockets, XLR/cinch
- Main-level controller
- Sub-level controller
- Phase changeover switch
- Cooling without fans
- Full symmetry End-stage setup
- Absolute short-circuit proof
- Limiter for subwoofers and satellites.
Scope of delivery
- Subwoofer, 2 satellites, 1x cold device cable.
Hints
N.B. Please provide a phone number when placing your order, to allow us to arrange for a delivery date. Delivery time: approx. 1 week.