VOLTCRAFT VC925 PV PV multimeter Digital Water-jet proof (IP65) CAT III 1500 V, CAT IV 1000 V Display (counts): 20000 Da

The VC-925 is a photovoltaic multimeterwhich has been developed from the ground up for measuring tasks for higher voltages than 1000 V. In order to cope with the prevailing conditions, the measuring instrument enables the detection of high direct voltages up to a maximum of 2000 V as well as alternating voltages up to a maximum of 1500V. For eMobility and energy solutions, this measuring device is also perfectly suitable due to its high voltage resistance.


Highest industrial safety
With its design to the measurement categories CAT III 1500 V and CAT IV 1000 V, the multimeter is designed for the safe measurements on appropriate electrical installations and eMobility. For even higher protection during measurement, the enclosed measuring leads are approved for CAT III 2000 V. (This means that the measuring leads must be able to withstand a transient voltage of 12,000 V).

Specific measurements for PV systems
By means of the provided irradiation adapter the solar radiation can be measured from 0 to 1400 W/m2. The temperature can also be recorded via the included K-type temperature sensor, WAS offers direct added value for the maintenance and testing of photovoltaic components.

Transflective display – the next generation
It combines the advantages of a TFT color display with an LCD. The display offers brilliant contrast similar to a conventional LCD when exposed to direct sunlight outdoors. For normal to dark conditions, the display shines with a contrast never before available. It possesses an individually configurable and an automatic brightness adjustment and an automatic light/dark switching (night mode).

Ground-breaking magnetic technology – both hands free for test leads
Extra strong neodymium magnets integrated in the casing ensure a secure fit on the control cabinet door. Thus, the device must not be placed on the ground any longer during measurements. If required, the measuring leads also adhere magnetically to the device.

Fantastically flexible test leads
A two-layer, two-color silicone sleeve with wear indicator provides together with an extremely fine-wired conductor structure, which is twisted for mechanical reinforcement with a highly flexible and tear-resistant fiber plastic, for highest flexibility and pleasant working.

Make it your device
Many functions can be configured individually. Automatic switch-off after 5, 10, 15 or 30 min. The bar graph can generally be switched on and off in order, for example, to be able to detect trends or fluctuations in a better way. Beep sound during measurement range change can be switched on/off.

Water and dust proof according to IP65
Use and storage in places with high humidity or wetness are possible without any problem. In this device, the measuring sockets are not part of the circuit board, but are completely sealed tight with the housing.

Impedance switching
The LoZ function makes it possible to measure alternating voltages with low impedance. The lower internal resistance of the measuring device reduces the measurement deviations due to stray and ghost voltages.

Bluetooth® connectivity and data logger
The multimeter VC-915 can be coupled with a smartphone. The free APP allows data to be logged, and the multimeter's display can be transferred to the APP, and in live mode read off the measured values on the smartphone's display.

Delta measurement
For measuring deviations of a specified value. This allows you to focus on the positive and negative changes and does not have to reckon with all the time.

Sample ratio
Measurement rate or duty cycle also refers to phase angle control, switched-mode power supplies and other digital switched devices for determining the percentage value between ON (pulse) and OFF.

Min Max
The highest and lowest values of a series of measurements are saved and displayed.

Display and keypad lock
Subtly incorporated edges protect the display, the rotary switch and all the keys.
An elaborately produced 2-component casing with integrated soft-rubber protection not only provides grip, but also protects the meter during rough applications.

Anti-tipping
The broad bearing surface made of soft rubber provides much more stability when the stand is folded out.

Non-slip
Lying and standing with connected measuring leads - the measuring device remains in position. When stored without test leads, the rubberized edge protector prevents it from slipping even when the meter is lying on the display side.

Built-in torch
It's easier to find your way in the dark to the fuse box with its integrated LED light.

Li-ion battery
The multimeter is operated with a Li-ion battery. A spare battery is included in the delivery. A USB-C connection is present directly in the battery housing for easy charging of the battery. In an emergency, a conventional power bank can help recharge the battery.

Factory calibration ensures accurate readings
Calibration according to manufacturer standards is part of Voltcraft Quality Assurance. This ensures high quality products and compliance with tolerance limits as outlined in the user manual. This does not include certification.

This text is machine translated.