Network cable tester R166002 Trend Networks SignalTEK QT 10G

The SignalTEK QT 10 gigabit qualification tester is the test solution for testing copper connections. It tests cable performance based on frequency-based measurements and verifies that the desired network speed is supported. It shows the available performance as compared to the desired speed on an easy to read display and the speeds of 10 MB/s to 10 GB/s including the new 2.5 and 5 GB/s multi-speeds are available. Connected to the network, diagnostics can be performed using ping, traceroute, and device scan tests. Wi-Fi access point scan helps you check signal strength, detect conflicts, and monitor basic Wi-Fi performance. It performs a load test of up to 90 watts to ensure that the power provided by the switch also provides enough power for the PoE devices over the installed cables and will evaluate the results with PASS/FAIL. The NetScan allows you to capture a list of connected devices, including manufacturer ID, IP address, and MAC address, with automatic IP address conflict checking. The TREND Anyware Cloud management system enables real-time collaboration between project managers and service engineers, pre-configuration of test settings, free space, easy location of project files, sharing links to test reports and Fleet Manager device management system. The SignalTEK QT supports copper qualification, live wiring test with immediate wiring result, Li-polymer rechargeable battery with an operating time of up to 10 hours. Optionally available, the #1-12 Remote Adapter Kits (R166020/male and R166021/female) are available for wire testing and enable efficient use when testing in one-man operation.

This text is machine translated.