Mean Well HDR-60-24 Rail mounted PSU (DIN) 24 V DC 2.5 A 60 W No. of outputs:1 x Content 1 pc(s)

DIN-Rail Mounting Single Output 1-phase power: 60 W

Even smaller and more powerful than the first generation (DR series) on DIN rail power supplies (DIN-rail) in a plastic housing is the new series HDR of mean well. Especially in the building automation and building control, the power supplies with 60 W (HDR-60), which correspond to protection class II The HDR-family of mean corrugated has a step-shaped plastic housing, has an input voltage range of 85 to 264 VAC (also available) and offers 277 VAC models with 5 V, 12 V, 15 V, 24 V and 48 V.
Thanks to the slim design measures the height is only 90 mm, the width 3 SU (52.5 mm). They can be used on the standardised DIN rail TS-35/7.5 and TS-35/15. To their properties also include a low no-load consumption of< 0,3W, a high degree of efficiency up to 91% and an adjustable DC output voltage as well as a wide operating temperature range (-30 to +70 °C). Also a LED display for operation is available.
The HDR-series of mean corrugated meets the European standard DIN EN 43880, the regulation of the European Union for harmonic current according to EN61000-3-2 class A, as well as all safety regulations according to UL 60950-1, UL508 and EN 61558-2-16.

This text is machine translated.

Highlights & Details

• Directly on the DIN-rail mountable
• Closed design, touch-proof screw terminals
• Universal input
• Overload protection through current limitation, auto recovery
• Protected against short circuit, overload, over voltage
• Low idle power
• LED display for power-on
• Insulation category II

Facts

• Directly on the DIN-rail mountable
• Closed design, touch-proof screw terminals
• Universal input
• Overload protection through current limitation, auto recovery
• Protected against short circuit, overload, over voltage
• Low idle power
• LED display for power-on
• Insulation category II

Comments