Buy ATEN CE700A VGA, USB A (USB 2.0) Extension via RJ45 network cable 150 m

A USB KVM extender from ProXime, model CE700AL, shows front and back views. Ports for VGA, USB, Remote I/O and AUTO/LOCAL are visible.

Black device with two lights: 'LINK' and 'REMOTE'.<br><br>Note: This appears to be a direct, technical description already in a neutral English style suitable for British English, so no substantial changes were needed.

A black ProXime USB KVM Extender for remote use, Model CE700AR, with two LEDs for 'Link' and 'Remote'.

Wiring diagram: At the top, a console connected to CE700AR via Cat 5e cable. Below, CE700AL connected to local PC.

A black KVM switch with VGA port and buttons for 'Remote', 'Local' and 'Auto/Local'. Lights indicate the active mode.

Back of an electronic device with connections: Power, two USB, console port, Ethernet 'REMOTE I/O' and VGA.

1/7

Datasheet (PDF)

22 Piece(s)

Sales and shipping:

Number

Piece(s)

Total (€ 138.65 / piece)

€

Report legal concerns

Highlights & Details

Aten CE700A console extender

Allows the operation of your system via the local and remote console (USB keyboard, mouse and monitor)
High resolution up to 1920 x 1200 pixels
Easy installation - only the cables to the devices, done!
Incl. Protection against static discharges and surges

Technical specifications

Product type: Extension

Transfer type: via RJ45 network cable

Interfaces (input): VGA
USB A (USB 2.0)

Interfaces (output): VGA
USB A (USB 2.0)

Resolution (max.): 1920 x 1200 p

Range (max.): 150 m

Factory colour: Black

Weight: 310 g

Length: 13 mm

Width: 82 mm

Height: 25 mm

Dim: (L x W x H) 13 x 82 x 25 mm

UKCA: yes

Documents & Downloads

Datasheet

Datasheet 989211 ATEN CE700A VGA, USB A (USB 2.0) Extension via RJ45 network cable 150 m

User & Safety Instructions

User & Safety Instructions 989211 ATEN CE700A VGA, USB A (USB 2.0) Extension via RJ45 network cable 150 m

Description

Features:.
- Cat 5e cable connects the Local and Remote Units - up to 150m apart- Dual console operation - control your system from both the local and remote USB keyboard, monitor, and mouse consoles- Built-in ASIC for greater reliability and compatibility- Auto Signal Compensation (ASC)- USB Keyboard and USB Mouse Ports- USB overcurrent detection and prevention- Pushbutton operating mode selection (Local Unit only) - select between Local and Auto operating modes. - Built-in 8KV/15KV ESD protection (Contact voltage 8KV; Air voltage 15KV) and 2KV surge protection- Automatic gain control - adjusts signal strength to compensate for distance- High resolution video - up to 1920 x 1200@60Hz (30m ); 1600 x 1200@60Hz (100m); 1280 x 1024@60Hz (150m)- Supports VGA, SVGA, SXGA, UXGA, WUXGA and multisyncmonitors; local monitor supports DDC; DDC2; DDC2B- Rack mountableEasy to install - no software required - connecting cables to the devices is all it takes- Multiplatform support - Windows, LinuxPackage Contents.
- 1x CE700AL USB KVM Extender (Local Unit)- 1x CE700AR USB KVM Extender (Remote Unit)- 2x 0AD6-1605-09EG Power Adapters- 1x USB KVM Cable (1. 8m)- 1x Mounting Kit- 1x User Instructions

Features

The integrated ASIC chip offers a higher reliability and compatibility
Automatic signal compensation
USB keyboard and USB mouse connections
USB overload protection
Operating mode by push buttons can be selected (only on the local device) Switching between the local and automatic operation
Built-in protection against static discharge to 8 or 15 KV (8 KV with contact, 15 KV with flashover) and surges up to 2 KV
Automatic signal level adjustment
Supports VGA, SVGA, SXGA, UXGA, WUXGA and multi-sync monitors
Rack mounting possible
Multi-platform compatible - Windows, Linux.