1/11
Clip Wireless microphone set Rode Wireless GO (3rd Gen) Transfer type (details):Wireless
EAN:
Part number:
Item no:
34 Piece(s)
Sales and shipping:
Number
Total (€ 172.26 / piece)
€
Highlights & Details
Digital 2-channel wireless microphone system
- Wireless microphone system suitable for camera, Smartphone, iPhone, computer
- Two transmitter modules (TX) with built-in condenser microphone
- Receiver module with headset connection for third microphone signal
- Intelligent GainAssist® automatic level control
Technical specifications
- Type
Clip
- Transfer type
Wireless
- Frequency response
50 - 20000 Hz
- Characteristics
Ball
- On/off switch
yes
- Weight
36 g
- Width
46.5 mm
- Height
20 mm
- Length
44 mm
- Dim
(L x W x H) 44 x 46.5 x 20 mm
- Interfaces
USB C®
- Cable length
0 mm
- Version
Connection cable
- Factory colour
Black
- Depth
20 mm
- Frequency
2.4 GHz
260 m
- Operating time
7 h
- No. of transmitters
2
- Product type
Wireless microphone set
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 3369014 Clip Wireless microphone set Rode Wireless GO (3rd Gen) Transfer type (details):Wireless
Description
Versatile complete system, which is suitable with two transmitter modules and a 2-channel receiver Ideal for interviews and other occasions, with which two sound sources are to be recorded at the same time and separately. The small transmitter modules already have a microphone installed and can be easily attached to clothes with their clamp.
The signal quality is both analogue and digital at its best: Crystal-clear and immediate transmitting capability. The transmitters work with RØDEs ingenious GainAssist level automatic. The critical sound pressure level of the built-in microphone is at a full 123.5 dB SPL – thus, ugly distortion are almost impossible. We would like to record the sound directly in the transmitter module with 32 bits float, the internal memory lasts for more than 40 hours.
The sound output on the receiver module is two-channel (stereo), either analogue via the 3.5 mm TRRS socket of the receiver or digital via the USB-C socket. Apart from a camera, the receiver can also be connected to a smartphone, iPhone or computer. All required are supplied. If one uses the USB-C socket connection for sound output, the 3.5 mm socket can be used for headphones, in order to be able to listen in on the recording. Since this is a TRRS jack, you can also connect a headset and thus even link a third microphone signal.
Wireless GO comes with a wide range of accessories including a USB 3-way charging hub (SC33), a 3.5 mm TRS connector cable (SC2) to the camera. A USB-C to Lightning cable (SC21), a USB-C to USB-C cable (SC22), three felt windshields for outside recordings and a high-quality neoprene transport case.
This text is machine translated.
The signal quality is both analogue and digital at its best: Crystal-clear and immediate transmitting capability. The transmitters work with RØDEs ingenious GainAssist level automatic. The critical sound pressure level of the built-in microphone is at a full 123.5 dB SPL – thus, ugly distortion are almost impossible. We would like to record the sound directly in the transmitter module with 32 bits float, the internal memory lasts for more than 40 hours.
The sound output on the receiver module is two-channel (stereo), either analogue via the 3.5 mm TRRS socket of the receiver or digital via the USB-C socket. Apart from a camera, the receiver can also be connected to a smartphone, iPhone or computer. All required are supplied. If one uses the USB-C socket connection for sound output, the 3.5 mm socket can be used for headphones, in order to be able to listen in on the recording. Since this is a TRRS jack, you can also connect a headset and thus even link a third microphone signal.
Wireless GO comes with a wide range of accessories including a USB 3-way charging hub (SC33), a 3.5 mm TRS connector cable (SC2) to the camera. A USB-C to Lightning cable (SC21), a USB-C to USB-C cable (SC22), three felt windshields for outside recordings and a high-quality neoprene transport case.
This text is machine translated.
Features
- Crystal-clear, transmitting-enabled audio quality
- Fee and registration-free 2.4-GHz band
- Range: 260 m (line of sight)
- 3.5 mm TRS connector for connecting a lavalier microphone to the transmitter
- Socket with external thread for locking the Lavalier II.
- Noise level 123.5 dB (internal microphone)
- Frequency response 50 Hz - 20 kHz (internal microphone)
- 32-bit float recording in the transmitter module (over 40 hours)
- Receiver module with LC-display for connection, level, charging status, mode
- Receiver module (RX) with USB-C connection and analogue 3.5 mm TRRS socket
- Can be used as headphone output, output to camera, headset port
- Power supply: Built-in lithium-ion rechargeable battery for up to 7 hours operation
- Dimensions 46.5 x 44 x 20 mm (per module)
- Weight 35 g (transmitter), 36 g (receiver)
Scope of delivery
- 2 transmitter modules with built-in microphone, receiver module, USB 3-way charging hub (SC33)
- 3.5 mm TRS connection cable (SC2) for camera
- USB-C to Lightning Cable (SC21) and USB-C to USB-C Cable (SC22)
- 3x wind protection for outside recordings
- Neoprene transport case
- User manual.
System requirements
- Windows 10, Mac OS 10.15, Android 11, iOS 14