Janitza 1503622 Janitza Electronic Rogowski coil 1 pc(s)
EAN:
Part number:
Item no:
Datasheet (PDF)
4 Piece(s)
Sales and shipping:
Number
Total (€ 176.46 / piece)
€
Only 4 Piece(s) available
Technical specifications
- Position error: 3 m.
- Frequency range +/- 1%
- Rated insulation voltage 40 Hz to 20kHz
- Protection class IP67
- Operating temperature: -30 °C to +80 °C
- Diameter 120 mm
- Product type
Rogowski coil
- Compatible with
Janitza
- Reading category
CAT III 1000 V
CAT IV 600 V
- Type
Janitza Electronic
Documents & Downloads
Datasheet
Datasheet 2875314 Janitza 1503622 Janitza Electronic Rogowski coil 1 pc(s)
User & Safety Instructions
User & Safety Instructions 2875314 Janitza 1503622 Janitza Electronic Rogowski coil 1 pc(s)
Description
Rogowski current transformer, 120 mm (UL certified) The Rogowski-coil is used for detecting differential currents of the type A on current rails and high current cables. Due to its specific functions, the flexible Rogowski coil proves to be a particularly appropriate solution for current measurement. It can be used in many cases where conventional current transformers are less suitable. The output signal of the Rogowski coil is fed to the RCM 201-ROGO differential current monitoring device, which outputs a normalized AC current of a maximum of 0...40mA at the output. 100mV/kA output signal (RMS) is suitable for measuring ranges of the RCM 201 ROGO: 5A, 10A, 25A, 125A connection line.
This text is machine translated.
This text is machine translated.
Features
- Suitable for current measurement from the mA-range up to several kA
- High linearity via the measuring range
- Uniform measurements regardless of the position of the conductor in the coil
- Already calibrated
- Bayonet lock
- Very small cable diameter: Ca. 8 mm (0.33 in)
- Can be used very sensibly with large or unfavorably shaped conductors or at difficult to access places
- No danger of voltage peaks with open secondary circuit
- No damage through overload
- No power input from the grid to be measured
- Light-weight, can be replaced on the measured conductor
- Fully shielded
- UL component identification UL 61010-1