1/3
MEAN WELL ELG-300-24A LED driver Constant voltage, Constant current 300 W 12.5 A 14.4 - 24 V DC not dimmable, adjustable
EAN:
Part number:
Item no:
Datasheet (PDF)
Number
Total (€ 75.62 / piece)
€
Highlights & Details
ELG-300-24A
- Constant voltage, Constant current
- 14.4 - 24 V DC
- 12.5 A
Technical specifications
- Mixed-mode output (voltage-stabilised/CV or current stabilised/CC)
- Depending on the connected LED light bulbs (constant current or constant voltage) fits the
- DC-output of the LED power supply unit, in the framework of the specified technical parameters of the data sheet of the load.
- The information about the power (max.) and output current (max.) refer to an input voltage of 200-305 V/AC
- Product type
LED driver
- Type
Constant voltage
Constant current
- Dim
(L x W x H) 246 x 77 x 39.5 mm
- Factory colour
Metal
- Output voltage (max.)
24 V DC
- Output voltage (min.)
14.4 V DC
- Test mark
CB, UL, SELV, ENEC
- Max. output current
12.5 A
- Output current (max.) - rounded
12.5 A
- Operating voltage
230 V AC
115 V AC
- LED driver features
not dimmable
adjustable
Surge protection
Overvoltage
PFC circuit
Outdoor
IP67
- Connection
Open end cable
- Max. power
300 W
- No. of outputs
1 x
- No. of inputs
1 x
- Input voltage (max.)
305 V AC
431 V DC
- Min. input voltage
100 V AC
142 V DC
- Weight
1450 g
- Power range
300 W (max)
- Type
Pulsed
- Width
77 mm
- Height
39.5 mm
- Length
246 mm
- Max. temperature
+85 °C
- Min. temperature
-40 °C
Documents & Downloads
Datasheet
Datasheet 2113454 MEAN WELL ELG-300-24A LED driver Constant voltage, Constant current 300 W 12.5 A 14.4 - 24 V DC not dimmable, adjustable
User & Safety Instructions
User & Safety Instructions 2113454 MEAN WELL ELG-300-24A LED driver Constant voltage, Constant current 300 W 12.5 A 14.4 - 24 V DC not dimmable, adjustable
Warranty Terms
Warranty Terms 2113454 MEAN WELL ELG-300-24A LED driver Constant voltage, Constant current 300 W 12.5 A 14.4 - 24 V DC not dimmable, adjustable
Description
With the ELG series of MEAN WELL we perform for you LED power supplies in the program, which is characterized by its variety.
With a setup time of less than 500 ms and a stand-by consumption of less than 0.5W fulfill the power supplies of the series ELG also in September 2016 Eco-design directive 2009/125/EC. intensified limit
This text is machine translated.
With a setup time of less than 500 ms and a stand-by consumption of less than 0.5W fulfill the power supplies of the series ELG also in September 2016 Eco-design directive 2009/125/EC. intensified limit
This text is machine translated.
Features
- Constant current and constant voltage
- Independent operating device
- Wide-range input
- Overload protection through current limitation, auto recovery
- Protected against short circuit, overload, overvoltage, overheating
- Built-in PFC circuit
- SELV compliant
- Safety Standards: EN 61347-1, EN 61347-2-13 and other
- Emc Standards: EN55015, EN61000-3-2 Class C, EN 61000-3-3, EN61547 and other
- Corresponds to 6 kV surge immunity level
- IP67, output voltage and current limit can be set via internal potentiometer on the bottom of the housing
Hints
Caution!
Make sure you pick an LED driver/transformer that comes with the appropriate power rating.
Choose a driver/transformer that supplies approx. 30 pecent more watttage, as the current consumption (i.e. amperage) of the LEDs is key, and not the power rating of the LED provided by the LED manufacturer.
Keep in mind that the switch-on surge tend to be much higher.