MEAN WELL XLG-75-H-AB LED driver Constant power 75 W 1300 - 2100 mA 27 - 56 V DC dimmable, 3-in-1 dimmer, adjustable, PF
EAN:
Part number:
Item no:
Datasheet (PDF)
2 Piece(s) (Only while stocks last)
Sales and shipping:
Number
Total (€ 22.68 / piece)
€
Only 2 Piece(s) available
Highlights & Details
XLG-75-H-AB
- Constant power
- 27 - 56 V DC
- 1300 - 2100 mA
Technical specifications
- Product type
LED driver
- Type
Constant power
- Dim
(L x W x H) 140 x 63 x 32 mm
- Factory colour
Metal
- Output voltage (max.)
56 V DC
- Output voltage (min.)
27 V DC
- Test mark
CB, MM, ENEC, UL
- Max. output current
2100 mA
- Output current (max.) - rounded
2.1 A
- Operating voltage
230 V AC
115 V AC
- Protection class
I
- LED driver features
dimmable
3-in-1 dimmer
adjustable
PFC circuit
Approved for use on furniture
Suitable for flammable surfaces
Surge protection
Overvoltage
IP67
- Connection
Open end cable
- Max. power
75 W
- No. of outputs
1 x
- Output current (min.)
1300 mA
- Input voltage (max.)
305 V AC
431 V DC
- Min. input voltage
100 V AC
142 V DC
- Weight
580 g
- Power range
75 W (max)
- Type
Pulsed
- Width
63 mm
- Height
32 mm
- Length
140 mm
- Max. temperature
+90 °C
- Min. temperature
-40 °C
Documents & Downloads
Datasheet
Datasheet 2143305 MEAN WELL XLG-75-H-AB LED driver Constant power 75 W 1300 - 2100 mA 27 - 56 V DC dimmable, 3-in-1 dimmer, adjustable, PF
User & Safety Instructions
User & Safety Instructions 2143305 MEAN WELL XLG-75-H-AB LED driver Constant power 75 W 1300 - 2100 mA 27 - 56 V DC dimmable, 3-in-1 dimmer, adjustable, PF
Warranty Terms
Warranty Terms 2143305 MEAN WELL XLG-75-H-AB LED driver Constant power 75 W 1300 - 2100 mA 27 - 56 V DC dimmable, 3-in-1 dimmer, adjustable, PF
Description
Features
- IP67
- Current limit adjustable via internal potentiometer, 3 in 1 dimming function (0...10 V DC, 10 V PWM, potentiometer)
- Independent operating device
- Universal input 100...305 V AC
- Metal housing
- Overload protection through current limitation, auto recovery
- Protected against short-circuit, over-current, over-voltage, over-temperature
- Built-in PFC circuit
- Low idle power less than 0.5W
- For LED lighting applications
- Surge immunity level 6 kV
Hints
Caution!
Make sure you pick an LED driver/transformer that comes with the appropriate power rating.
Choose a driver/transformer that supplies approx. 30 pecent more watttage, as the current consumption (i.e. amperage) of the LEDs is key, and not the power rating of the LED provided by the LED manufacturer.
Keep in mind that the switch-on surge tend to be much higher.