TDK-Lambda GEN40-125-3P400 19" bench PSU (adjustable voltage) 0 - 40 V DC 0 - 125 A 5000 W 1 x programmable

The powerful5000 W att laboratory power supply unit with only 2HE which can be stacked on top of one another directly, so needs no air slit either above or below and can actually with 2 HE. Output voltages0 - 40 V DC and output currents0 - 125 A can be set directly on the device or remotely using built-in RS232/RS485. Via analog inputs can be programd all important functions (Control voltage 0 - 5 V, 0 - 10 V or external resistance, for example, digital control of LabView and LabWindows drivers are appropriate). High-resolution 16-bit A/D and D/A converters enable very precise settings and programming; the dial controls on the device can be switched between coarse and fine adjustment. A double digital display displays the current values as well as various status information (including the Over Voltage Protection, Under Voltage Limit, overload mode, address settings), and a monitor output provides corresponding analogue voltages (0 - 5 V or 0 - 10 V) for external monitoring. The devices can naturally be operated as a constant voltage as well as a constant current source and can, if necessary, automatically switch between these operating modes. Several devices can be switched serially or in parallel. These GEN-Models are suitable for mounting in 19'' racks. GEN/H models are half the structural shape.