Buy TracoPower TEP 75-7218WI DC/DC converter (component) 110 V DC 48 V DC 1.6 A 75 W No. of outputs: 1 x Content 1 pc(s)

Metallic voltage converter with the inscription 'TRACO POWER TEP 75-2411WI'. Input range: 9-36VDC, output: 5VDC/15A.

Datasheet (PDF)

Sales and shipping:

Number

Piece(s)

Total (€ 138.65 / piece)

€

Report legal concerns

Highlights & Details

TracoPower TEP 75-7218WI DC/DC converter (component) 110 V DC 48 V DC 1.6 A 75 W No. of outputs: 1 x Content 1 pc(s)

Robust, compact metallic casingUltra wide 4:1 input rangesOperation at full load up to +60 °C with convection coolingLow-voltage switch-offInput polarity protectionOutput voltage can be setRemote on/offHeat sink (TEP-HS1 as an option)

Technical specifications

Adjustment range of control deviations: Input change: 0.1 % , load change (0-100%): 0.1 %
Short-circuit protection: Continuous, automatic Restart
Safety standards UL/cUL 60950-1, IEC/EN 60950-1, EN 50155

Product type: DC/DC converter (component)

Type: TEP 75-7218WI

Nominal voltage: 110 V DC

Min. input voltage: 43 V DC

Input voltage (max.): 160 V DC

No. of outputs: 1 x

Output voltages: 48 V DC

Max. output current: 1.6 A

Output current (max.) - rounded: 1.6 A

Efficiency (max.): 90 %

: 75 W

Insulation voltage: 2250 V DC

Connection: Solder pins

Operating temperature (min.): -40 °C

Operating temperature (max.): 75 °C

Dim: (L x W x H) 61 x 57.9 x 12.7 mm

Height: 12.7 mm

Length: 61 mm

Width: 57.9 mm

Weight: 97 g

Content: 1 pc(s)

: 75 W

Type: TEP 7 Series

Operating temperature: -40 - +75 °C

Insulation voltage: 2250 V DC

Documents & Downloads

Datasheet

Datasheet 2790029 TracoPower TEP 75-7218WI DC/DC converter (component) 110 V DC 48 V DC 1.6 A 75 W No. of outputs: 1 x Content 1 pc(s)

Warranty Terms

Warranty Terms 2790029 TracoPower TEP 75-7218WI DC/DC converter (component) 110 V DC 48 V DC 1.6 A 75 W No. of outputs: 1 x Content 1 pc(s)

Description

The TEP-75WI series offers very powerful, insulated DC/DC-converters with an ultra-wide 4:1 input range in a robust, shielded metallic casing. These converters are suitable for a large range of applications and have been developed especially for industrial applications, where no board mounting, but instead a mounting in the casing is necessary. A chassis mounting or the mounting of a heat sink can be done quickly and simply with the help of four M3 screws. The very high degree of efficiency permits a working temperature range of up to +60 °C with natural convection cooling without a reduction of power. Other features are the adjustable output voltage, external on/off and the low-voltage cut-off. Owing to the wide input range and the reverse polarity protection, these DC/DC-converters are a relevant solution for many applications and battery-operated systems.