IVT 18017-G Starting current limitation ASB 12-G White IP44
EAN:
Part number:
Item no:
10 Piece(s)
Do your needs go beyond this?
Sales and shipping:
Number
Total (€ 65.54 / piece)
€
Only 10 Piece(s) available
Highlights & Details
Starting current limitation ASB 12-G
- Robust casing with earthing contact socket-outlet
- Dust- and splashproof (IP 54)
- Max. breaking capacity 2,700 W
- Nominal current max. 12 A
- Short reset time < of 0.4 seconds
- Power cord 2.8 m
Technical specifications
- Minimum connection power:> 100 W
- Power rating (max.)
2700 W
- Factory colour
White
- Dim
(W x H x D) 121 x 80 x 84 mm
- Type A
PG plug
- Type B
PG connector
- Cable length
2.8 m
- Width
121 mm
- Height
80 mm
- Depth
84 mm
IP44
- Operating voltage
230 V/50 Hz
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 1273194 IVT 18017-G Starting current limitation ASB 12-G White IP44
Description
Starting current limiter IVT ASB 12-G prevents unnecessary triggering of fuses
When using electrical tools such as circular saws, angle grinders, cutting grinders, compressors, pumps, Chopper, cleaning devices or transformers often cause the fuse elements to trip unintentionally. This can be caused by current peaks that occur when such loads are switched on.
The electronically controlled ASB 12-G starting current limiter captures these high inrush currents and prevents unnecessary triggering of the upstream fuse elements. The minimum connected load is 100 W, the maximum switching power is 2700 W.
Due to its extremely short reset time (< 0.4 s), the inrush current limiter is ready for use shortly after switching off an electrical device.
Application recommendations
This robust, dust- and splash-proof (IP 54) starting current limiter is equally suitable for indoor and outdoor use. Thanks to 2.8 m long connection cable and integrated earthing contact socket-outlet, it can be flexibly used, eg on the construction site, in factories, in gardens as well as in rooms with splash-water contact (wet rooms).
This text is machine translated.
When using electrical tools such as circular saws, angle grinders, cutting grinders, compressors, pumps, Chopper, cleaning devices or transformers often cause the fuse elements to trip unintentionally. This can be caused by current peaks that occur when such loads are switched on.
The electronically controlled ASB 12-G starting current limiter captures these high inrush currents and prevents unnecessary triggering of the upstream fuse elements. The minimum connected load is 100 W, the maximum switching power is 2700 W.
Due to its extremely short reset time (< 0.4 s), the inrush current limiter is ready for use shortly after switching off an electrical device.
Application recommendations
This robust, dust- and splash-proof (IP 54) starting current limiter is equally suitable for indoor and outdoor use. Thanks to 2.8 m long connection cable and integrated earthing contact socket-outlet, it can be flexibly used, eg on the construction site, in factories, in gardens as well as in rooms with splash-water contact (wet rooms).
This text is machine translated.
Scope of delivery
- Starting current limiter IVT ASB 12-G
- Instructions for use in DE, GB, FR, NL
Hints
The starting current limitation should not be used for voltage transformers and generators, which do not provide the necessary start-up current of each consumer.