Jeti DUPLEX MT 125 Temperature sensor
The MT 125 sensors are designed for measuring temperature of devices such as motors, controllers, batteries and other accessories in the model. The Terminal JETIBOX is used for representation of measured values and the information is transmitted wire…
The MT 125 sensors are designed for measuring temperature of devices such as motors, controllers, batteries and other accessories in the model. The Terminal JETIBOX is used for representation of measured values and the information is transmitted wire…
DUPLEX MT 125 Temperature sensor
The MT 125 sensors are designed for measuring temperature of devices such as motors, controllers, batteries and other accessories in the model. The Terminal JETIBOX is used for representation of measured values and the information is transmitted wirelessly via the DUPLEX 2.4GHz system. The 2.4GHz band is used for communication by the Duplex System which allows you to transfer control data to the model and also back to the transmitter. The obtained telemetrical data is transferred in real time during the operation and the current status of measured variables can be viewed on the LCD screen of the JETIBOX. The MT 125 unit records the minimum and maximum temperature of each sensor and provides details of their current values. The JETIBOX terminal is used for setting the parameters and for displaying the measured values.
The MT 125 unit consists of two parts. First of all, the actual 125 MT module, which is used to record data from temperature sensors and can be connected to the JETIBOX, the receiver or to the Expander of the DUPLEX system. The actual measurement of temperature is done by the sensors connected to the MT module. Kindly note that the temperatures of the module and sensor do not exceed the specified parameters - see table in technical data. The MT 125 module allows triggering of audio alerts for separate sensors. These alerts can be used as reports of exceeding set temperatures or dropping below an allowed limit. The audio signal is generated by the transmitter module DUPLEX Tx via a small built-in siren. In order to differentiate better between the different types of alarms, these are differentiated by transmission of various Morse Code characters. The audio alert on exceeding of parameter is generated even if no JETIBOX is connected. The exceeded parameter is displayed on LCD screen by means of connected JETIBOX. The alert and display on LCD screen of JETIBOX alternates with exceeding of several parameters.
Facts
- Operating voltage: 3.5 - 8.4 V
- Current consumption: approx. 7 mA
- Temperature sensors: -55°C - +125°C
- Sensor accuracy: 0.5%
- Operating temperature: -10 °C - 85 °C
Comments
Customer reviews
Similar products
See and discover other items from category Telemetry