Kemo M152 Rain sensor Component 12 V DC
Kemo's M152 module combines a liquid sensing plate and 12V normally open contact relay to produce a switching operation based on an input of rainfall or snowfall. The relay is activated when rain is detected on the sensor plate and de-activated when …
- Warranty: 24 months
- Manufacturer: Kemo
Kemo's M152 module combines a liquid sensing plate and 12V normally open contact relay to produce a switching operation based on an input of rainfall or snowfall. The relay is activated when rain is detected on the sensor plate and de-activated when …
- Warranty: 24 months
- Manufacturer: Kemo
Technical data
Operating voltage | 12 V DC |
---|---|
Current consumption | 120 mA |
Version | Component |
Dim | (L x W x H) 57 x 43 x 25 mm |
Height | 25 mm |
Length | 57 mm |
Width | 43 mm |
Operating voltage | 12 V DC |
Output rating | 2 A/25 V DC |
Product type | Rain sensor |
Documents & Downloads
Kemo M152 Rain sensor Component 12 V DC
Kemo's M152 module combines a liquid sensing plate and 12V normally open contact relay to produce a switching operation based on an input of rainfall or snowfall. The relay is activated when rain is detected on the sensor plate and de-activated when water is no longer present. Integrated heating avoids standing water on the plate once it has stopped raining.
Potential projects could include motorised windows, automated awnings or even automatic washing line covers! To use this module with 240V appliances, a secondary relay is required, activated on basis of the module's 12V signal. Choosing this relay depends on your application.
Highlights & Details
- Automate appliances to switch on/off when it rains or snows
- Relay activated when liquid contacts sensor plate
- Heated sensor area avoids activation by standing water
- At size of a small matchbox, integrates easily into your project
Facts
- Integrated 12V 2A SPST-NO relay
- Sensor heating: Automatic activation, when it comes in contact with rain
- LED 1: Operational display
- LED 2: Relay message.
- Warranty: 24 months
- Manufacturer: Kemo
Comments
Before the rain water flows on to the rain sensor, it would be helpful if the rain water first flows through the roof or the gutter, because the dirt particles make the rain water (like distilled water) only conductive and thus ensure a reliable operation of the sensor.Frequently bought together
Customer reviews
Similar products
See and discover other items from category Sensor Assembly Kits