Servisol The form of protection colorless 400 ml
EAN:
Part number:
Item no:
Show alternatives
Sales and shipping:
Quantity (Piece(s))
Unit Price
Package size (plus VAT.)
1
1 L = € 39.90
€ 15.96
5
1 L = € 37.50
€ 15.00
20
1 L = € 35.13
€ 14.05
Volume discounts vary depending on the seller
You save € 0.00
Total (1 l = € 39.90)
€
Highlights & Details
The form of protection colorless
- Protection against moisture and corrosion
- Not harden
Technical specifications
- Product type
- Content
400 ml
Documents & Downloads
Security datasheet
Security datasheet 891182 Servisol The form of protection colorless 400 ml
Signal word
Danger
GHS / H Statements
- H 222: Extremely flammable material
- H229: Pressurized container: may burst if heated
- H 315: Causes skin irritation
- H 319: Causes serious eye irritation
- H 336: May cause drowsiness or dizziness
- H 411: Toxic to aquatic life, with long-lasting effects
GHS / P Statements
- P 102: Keep away from children
- P 210: Keep away from heat/sparks/open flames/hot surfaces – No smoking
- P 211: Do not spray on an open flame or other igntion source
- P 251: Pressurized container – Do not pierce or burn, even after use
- P 261: Avoid inhaling dust/fume/gas/mist/vapours/spray
- P 271: Use outdoors or in a well-ventilated area only
- P 410+412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
- P 501B: Dispose of contents/container at a recycling center
Description
The form of protection colorless forms a fat or waxy coating for lasting protection against moisture and corrosion. It forms a clear, colorless/transparent protective film which does not harden. It crawls, does not drip off, does not and is free of silicone.
In the plastic processing causes the thin film during injection. very quickly. It is thus particularly in the injection molding processing of white and transparent parts is ideally suitable. For the protection of forms and tools in the plastic processing. Prevents corrosion damage caused by fingerprints.
This text is machine translated.
In the plastic processing causes the thin film during injection. very quickly. It is thus particularly in the injection molding processing of white and transparent parts is ideally suitable. For the protection of forms and tools in the plastic processing. Prevents corrosion damage caused by fingerprints.
This text is machine translated.