Aim TTi MX180T Bench PSU (adjustable voltage) 0 - 120 0 - 3 A 18 W, 180 W No. of outputs 3 x
EAN:
Part number:
Item no:
Number
Total (€ 1,306.72 / piece)
€ 1,306.72
plus VAT.
Highlights & Details
3-channel laboratory power supply aim TTi MX 180 T
- No. of outputs 3 x
- 0 - 120 / 0 - 3 A
- 0 - 60 V / 0 - 3 A
- 0 - 12 V / 0 - 1.5 A
- 18 W, 180 W
Technical specifications
- Type
MX180T
- Product type
Bench PSU (adjustable voltage)
- No. of outputs
3 x
18 W
180 W
Manufacturer's standards (no certificate)
- Input voltage
115 V AC
230 V AC
- Output voltage (max.)
120 V
- Output voltage (min.)
0 V
- Output voltage 2 (max.)
60 V
- Output voltage 2 (min.)
0 V
- Output voltage 3 (max.)
12 V
- Output voltage 3 (min.)
0 V
- Max. output current
3 A
- Output current (min.)
0 A
- Output current 2 (max.)
3 A
- Output current 2 (min.)
0 A
- Output current 3 (max.)
1.5 A
- Output current 3 (min.)
0 A
- Max. temperature
+40 °C
- Min. temperature
+5 °C
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 1418441 Aim TTi MX180T Bench PSU (adjustable voltage) 0 - 120 0 - 3 A 18 W, 180 W No. of outputs 3 x
Information
Information 1418441 Aim TTi MX180T Bench PSU (adjustable voltage) 0 - 120 0 - 3 A 18 W, 180 W No. of outputs 3 x
Description
The MX 180 T has two outputs with a performance of each 0 to 30 V at 0 to 6 A as well as a third output with an output of 0 to 5.5 V at 0 to 3 A. Each output has simultaneous measurement with high resolution, switchable remote scanning and an individual output switch. The MX180 TP contains USB, RS232, GPIB and LXI-compatible LAN interfaces. They offer a full remote control and remote-controlled reading and are used for voice applications at a high level by an IVI-drivers are supported. The Aim Series-TTi MX offers an impressive power density due to the combination of schalt-vorregulierung with high frequency with linear after adjustment, in order to deliver the performance of a completely linear design. Excellent phase and load balance is with low noise level and good transient response. In order to be used in a variety of applications, each output via more than one area. Outputs one and two can either 60 V/3 A or 15 V/10 A as an alternative to 30V/6A, while output three 12 V/1.5 A can provide. If a higher performance is required, you can outputs one and two are combined, up to 360 watts as either a 30V/12A, 15V/20A, 60 V/6 A or 120 V/3A of a single output.
This text is machine translated.
This text is machine translated.
Features
- Three high-power outputs, two each with 180 watt and a 18 Watt
- Total power of 378 watts in a very compact housing
- Switching the measuring range offers up to 120 volts and up to 20 A
- 21 Series combinations for maximum flexibility
- Up to 360 watts from a single output
- Low output noise and low ripple via linear endre locking
- High setting resolution of 1 mV and 1 mA
- Changing the activation of the surge protection and over-current protection on all outputs
- 50 Setting memory per output as well as 50 linked memory
- Selectable Voltage tracking (insulated track)
- Selectable averaging of the current measuring device; Switchable Remote scanning on all outputs
- Graphic LCD offers simultaneous output measurement display
- Numerical or dial control of all parameters
- Individual or combined on and off of output with programmable delay sequencing
- Front panel locking with optional pass code protection
- 3U housing for tabletop or rack mounting