Buy Allnet SATA HAT Quad NAS Raspberry Pi® add-on PCB Compatible with (development kits): Raspberry Pi®

A green electronic circuit board with multiple expansion slots and USB ports, used for hardware extensions.

A green circuit board with USB ports and multiple expansion card slots, used in computers or electronic devices.

A green computer motherboard with multiple black expansion slots and two USB ports on one side.

Allnet SATA HAT Quad NAS Raspberry Pi® add-on PCB Compatible with (development kits): Raspberry Pi®-3

A computer board with multiple SATA ports, LED indicators for activity and errors, a fan control button, an OLED display, and a 12V DC connector.

'A green circuit board, labelled with multiple connectors and LEDs: activity indicator LEDs, fan control, OLED display, DC 12V and ATX PSU connector.'

1/6

Datasheet (PDF)

Available soon

Sales and shipping:

Conrad Electronic Terms & Conditions

Number

Piece(s)

Total (€ 70.58 / piece)

€ 73.94

-5 %

€ 70.58

plus VAT.

Report legal concerns

Technical specifications

Product type: Raspberry Pi® add-on PCB

Suitable for: Raspberry Pi® 4 B

Suitable for: Raspberry Pi®

Interfaces: USB

Compatible with: Raspberry Pi®

UKCA: yes

Documents & Downloads

Datasheet

Datasheet 2362448 Allnet SATA HAT Quad NAS Raspberry Pi® add-on PCB Compatible with (development kits): Raspberry Pi®

User & Safety Instructions

User & Safety Instructions 2362448 Allnet SATA HAT Quad NAS Raspberry Pi® add-on PCB Compatible with (development kits): Raspberry Pi®

Description

The Quad SATA USES the USB3 buses of the Raspberry Pi 4. For 2.5-inch hard drive configurations, the USB PD/QC power supply ( >30W power supply) is sufficient to operate the hard drives and the Raspberry Pi 4 together.

This text is machine translated.

Features

Up to 4x HDD/SSD's - 2.5" or 3.5" memory is supported. Multiplies two independant USB3 buses on Raspberry Pi 4
DC CURRENT INPUT 12V/5A
Support for 2.5 inch drives and Raspberry Pi 4
Standard external ATX power supply support for 3.5" hard drives
Fan and heat sink for Raspberry Pi 4 CPU cooling
HDD Suspend mode supports UASP support
Software RAID 0/1/5 support
Optional PWM control fan for heat distribution of the hard disk
Optional OLED display for IP address/storage information
For 3.5-inch hard drive configurations, a standard ATX power supply is required to operate the hard drives and the Raspberry Pi. For 4x 3.5-inch hard drives, the power supply should be at least 60W or more
deliver.