1/7
Amewi ADAC H145 RC model helicopter RtF
EAN:
Part number:
Item no:
Number
Total (€ 239.50 / piece)
€ 239.50
plus VAT.
Only 6 Piece(s) available
Highlights & Details
ADAC H145 Helicopter Brushless 6-Channel 6G RtF - LICENSE -
- 5-blade rotor and Fenestron tail propeller, same as the original: Absolute scale optics with stable flight characteristics with enough power reserves for all common maneuvers and suitability for outdoor even in light wind
- Barometer and ground sensor support hovering: The pilot no longer has to concentrate on manual lifting, but can become familiar with all other functions without danger and loss of control
- High-quality 2.4GHz transmitter with aluminum sticks and a lot of settings options: For instance, switching from mode 2 to mode 1, Dual rate, auto-start/landing, emergency stop and pitch angle for experienced pilots
Technical specifications
- Main material: ABS plastic
- Motor main drive: Brushless 1807
- Motor Fenestron-drive: Brushless 1103
- Remote control: 6-channel, 2.4 GHz, mode 1+2
- Range 60 - 80m
- Servos: 3x Mini Digital
- LiPo 2S 7.4V 1200mAh 20C hard case with integrated USB-C charging port, 100x34x19mm, 61g
- Flight time: 12-14min
- Charger USB-cable
- Charging time 90 min
- Model version
RtF
- Main rotor Ø
320 mm
- Length
335 mm
- Weight
238 g
- Weight class
0 - 249 g
- Dim
(L x W x H) 335 x 55 x 115 mm
- Height
115 mm
- Width
55 mm
- Flight duration
14 min
- Recommended minimum age
14 years
- Model
ADAC H145
- Charging time
2 h
- UKCA
not relevant
- Product type
RC model helicopter
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 3339737 Amewi ADAC H145 RC model helicopter RtF
Description
The ADAC rescue helicopter identified as D-HYAR is the first H-145 with five-blade rotor used by the ADAC. He started his first mission on December 23, 2021, when he started from the air rescue center "Christoph Westfalen" at Airport Park Greven, near Münster-Osnabrück Airport.
This licensed scale replica of the original is in no way inferior: All details were realistically converted, such as rivets, inscription, painting, position lights, for example Handles, antennas, the five-blade rotor and even the Fenestron tail propeller correspond exactly to the real helicopter. Even the technical equipment leaves nothing to be desired. The model is equipped with brushless motors in the main drive as well as in the Fenestron. Hover flight is supported by barometric electronics and a soil sensor. In this way, the pilot can concentrate on flying without having to pay attention to the flying height all the time. The model also offers an auto-start/landing function, and the servo paths of the swash plate can be set in three stages (from beginners to professionals). The remote control can be switched to mode 1 and mode 2, has an emergency stop button, which immediately switches off the engine in case something gets out of control. In addition, each function can be manually trimmed. An automatic gyro calibration ensures smooth flight behavior. Thanks to the integrated auto-stabilization, which resembles the flight behavior of a coaxial helicopter, this model is also excellently suitable for beginners and also inspires experienced pilots.
This text is machine translated.
This licensed scale replica of the original is in no way inferior: All details were realistically converted, such as rivets, inscription, painting, position lights, for example Handles, antennas, the five-blade rotor and even the Fenestron tail propeller correspond exactly to the real helicopter. Even the technical equipment leaves nothing to be desired. The model is equipped with brushless motors in the main drive as well as in the Fenestron. Hover flight is supported by barometric electronics and a soil sensor. In this way, the pilot can concentrate on flying without having to pay attention to the flying height all the time. The model also offers an auto-start/landing function, and the servo paths of the swash plate can be set in three stages (from beginners to professionals). The remote control can be switched to mode 1 and mode 2, has an emergency stop button, which immediately switches off the engine in case something gets out of control. In addition, each function can be manually trimmed. An automatic gyro calibration ensures smooth flight behavior. Thanks to the integrated auto-stabilization, which resembles the flight behavior of a coaxial helicopter, this model is also excellently suitable for beginners and also inspires experienced pilots.
This text is machine translated.
Features
- Scale-paint of the ADAC-rescue helicoper D-HYAR
- LED-illumination with position lighting at the side fins
- High-strength ABS-fuselage shell
- Stable and flexible landing gear
- Aluminium rotor head
- Aluminium swash plate
- Large 7.4V Li-ion battery with safety lock and integrated USB charging connection
- Very good flight stabilization thanks to sophisticated technology in the model
- Beginner's due to electronic support
- Auto takeoff and auto land mode
- Emergency stop function for the motors of the remote control
Scope of delivery
- Model
- Radio control
- Accumulator
- USB cable
- Tools
- Replacement parts
- Instructions DE/EN
Hints
Required accessories
4x 1.5V AA batteries for the remote control