Auxiliary contactor Schneider Electric A9A26915

This electrical accessory from Acti9 is a changeover contact (NORMALLY OPEN contact/NORMALLY CLOSED contact) for displaying the position OPEN or CLOSED of the circuit breaker. Operating current is between 2mA and 100mA at a frequency of 50Hz to 60Hz at 24VAC to 240VAC & 24VDC to 220VDC. Open / closed, auxiliary contact. For installation in small businesses, buildings, critical infrastructure, healthcare, industry, in data centers. This electrical accessory is compatible with the Acti9 series such as iC60 dual terminal and iID dual terminal. The IOF is used for either the device short name or the compatibility code. Screw terminal connection on the top side. The connection permits rigid copper cables. The cable cross-section ranges from 1mm² to 4mm². The IOF is used for either the device short name or the compatibility code. It has a screw terminal connection on top. The connection is suitable for rigid copper cables. The cable cross-section can range from 1mm² to 4mm². Screw terminal connection at top allows a cable cross-section of 0.5 mm² to 2.5 mm² with flexible copper cables. Screw terminal connection on the top side. The connection permits rigid copper cables. The cable cross-section of 2 cables allows a cable cross-section of 2.5 mm². It has a screw-clamp connection on the top side. Connection is possible flexibly with wire-end sleeve copper cables (2 cables). The cable cross-section is 1.5 mm². The rated insulation voltage (UI) is up to 500 V. The rated surge voltage (Uimp) is 4kV. The width in 9 mm intervals is 1. The dimensions are (W) 9 mm x (H) 86 mm x (D) 73 mm. The color of the product is white (RAL 9003). The degree of contamination is 3. The degree of tropical fitness is treatment 2. The tightening torque of the connection is 1N.m (bottom) for the screwdriver type PZ1. In accordance with the standard IEC 60529, the IP protection class is IP20. The operating temperature is between -25°C and +70°C. The storage temperature ranges from -40°C to +85°C. This product complies with the standards EN/IEC 60947-5-1 and EN/IEC 60947-5-4. This product is certified with LCIE, ASEFA, KEMA and ASTA marks.

This text is machine translated.