BambuLab B00-W0-1.75-1000-spl Filament ABS plastic high tensile strength, shatter-proof, heat-resistant 1.75 mm 1000 g W

RFID for smart printing
All print parameters are embedded in RFID, which can be read via AMS (Automatic Material System). Insert and print! No more laborious settings

Recommended print settings
Drying settings before printing 80 °C,8 h
Printing and maintaining humidity in container 20% RH (sealed, with desiccant)
Nozzle temperature 240 - 270 °C.
Bed temperature (with PVP adhesive) 80 - 100 °C.
Printing speed 300 mm/s

Physical properties
Density: 1.05 g/cm³
Vicat softening temperature 94 °C.
Heat distortion temperature 87°C
Melting point 200 °C
Melt index 34.2 ± 0.7 g/10 min

Mechanical properties:
Tensile strength 41 ± 1 MPa
Fractional expansion rate 10.5 ± 1.0 %
Bending module 1880 ± 110 MPA
Bending resistance 68 ± 3 MPa
Impact strength 39 ± 3.6 kJ/m²

This text is machine translated.