Image similar
Image similar
Bender RFID110-L1 incl. LEDs eMobility RFID card reader
EAN:
Part number:
Item no:
Number
Total (€ 92.43 / piece)
€ 92.43
plus VAT.
Technical specifications
- Rated voltage: 12.5 V
- Over voltage category III
- Pollution level 3
- Test surge voltage: 800 V
- Rated insulation voltage 12.5 V
- Height: ≤ 2000 m above sea level
- Nominal voltage: DC 3.3/5 V
- Nominal voltage tolerance: ±5 %
- Nominal current 140/64 mA
- Radio frequency: 13.56 MHz
- Operating temperature -30…+70 °C
- Connection to charge controller: Via RJ45 cable
- Max. Length of connection cable < : 3 m.
- IP00 protection
- Maximum reading distance 100 mm
- Weight: 25 g
- Product type
eMobility RFID card reader
IP00
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 2372872 Bender RFID110-L1 incl. LEDs eMobility RFID card reader
Description
RFID module with integrated status LEDs
The RFID module is a separate board that simplifies the interaction between the user and the charging system and conforms to the ISO14443A/MIFARE. It can be connected to the charge controller via a standard RJ45 cable, which is the main component of the charging system.
The charging process is started by holding a valid RFID card registered in a backend system to the reader on the RFID module. The truck starts charging when the switch in the charging system is closed. In offline mode, the charge controller can either allow the charging process without authorization or authorize the user on an RFID basis and a local "white list" with the authorized RFID cards.
This text is machine translated.
The RFID module is a separate board that simplifies the interaction between the user and the charging system and conforms to the ISO14443A/MIFARE. It can be connected to the charge controller via a standard RJ45 cable, which is the main component of the charging system.
The charging process is started by holding a valid RFID card registered in a backend system to the reader on the RFID module. The truck starts charging when the switch in the charging system is closed. In offline mode, the charge controller can either allow the charging process without authorization or authorize the user on an RFID basis and a local "white list" with the authorized RFID cards.
This text is machine translated.