BUILDTAK BUILDTAK PEEI 254 x 254 mm PEI PEI10X10
EAN:
Part number:
Item no:
Quantity (Piece(s))
Unit Price
Package size (plus VAT.)
1
1 M2 = € 400.62
€ 26.04
3
1 M2 = € 385.08
€ 25.03
Volume discounts vary depending on the seller
You save € 0.00
Total (1 m2 = € 400.62)
€ 26.04
plus VAT.
Highlights & Details
BuildTak bed foil 254 x 254 mm
- Easier removal of finished prints compared to BUILDTAK Original
- ideal for printing with PETG, for example
- Useful addition for devices with Flexplate system
- Easy replacement of flex plates depending on the printed material
Technical specifications
- Type
BUILDTAK PEEI 254 x 254 mm
- Product type
Heated bed film
- Factory colour
Black
- Width
254 mm
- Depth
254 mm
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 1848673 BUILDTAK BUILDTAK PEEI 254 x 254 mm PEI PEI10X10
Description
BUILDTAK Polyetherimide (PEI) -Print sheets are made of high quality Ultem 1000 PEI.
As a comparable alternative to the BUILDTAK Original 3D printing surface, BUILDTAK PEI has slightly different adhesion and separation properties, which vary depending on the material to be printed. In general, BUILDTAK PEI offers easier removal of finished prints, while BUILDTAK Original offers greater adhesion when printing.
In combination with the BUILDTAK Flexplate system, multiple FlexPlates can be easily exchanged between the BUILDTAK Original and BUILDTAK PEI print surfaces, depending on the material being printed. (For example, polycarbonate requires the extra strong adhesion of BUILDTAK to successfully finish the prints, while PEI should be used for PETG because of the possibility of easier removal.)
This text is machine translated.
As a comparable alternative to the BUILDTAK Original 3D printing surface, BUILDTAK PEI has slightly different adhesion and separation properties, which vary depending on the material to be printed. In general, BUILDTAK PEI offers easier removal of finished prints, while BUILDTAK Original offers greater adhesion when printing.
In combination with the BUILDTAK Flexplate system, multiple FlexPlates can be easily exchanged between the BUILDTAK Original and BUILDTAK PEI print surfaces, depending on the material being printed. (For example, polycarbonate requires the extra strong adhesion of BUILDTAK to successfully finish the prints, while PEI should be used for PETG because of the possibility of easier removal.)
This text is machine translated.