Buy EA Elektro Automatik VRLA charger BC-512-21-RT 12 V Charging current (max.) 21 A

Grey automatic battery charger with red and black clamps and plug connections. Suitable for 6 V and 12 V batteries.

Lead-Acid Battery Charger with Mains Switch, Input 100-240V, Output 12V 20.5A. Inscription 'FOR INDOOR USE'.

1/2

Unavailable

Sales and shipping:

Conrad Electronic Terms & Conditions

Total (€ 268.07 / piece)

€ 268.07

plus VAT.

14-day return policy included

Report legal concerns

Highlights & Details

EA Elektro Automatik VRLA charger BC-512-21-RT 12 V Charging current (max.) 21 A

I-U-U charging method

Technical specifications

Switch-on current max. 30 A

Product type: VRLA charger

Matching rechargeable battery: SLA
Lead-acid
Lead acid membrane

Suitable for lead-type rechargeables: 12 V

Recommended battery capacity (min.): 10 Ah

Recommended battery capacity (max.): 200 Ah

Charging slots: 1

Operating voltage: 90 - 264 V

Charging current (max.): 21 A

Charging current at 12 V: 21 A

Charge Voltage: 13.8 V

Width: 110 mm

Height: 58 mm

Depth: 226 mm

Weight: 1750 g

Dim: (W x H x D) 110 x 58 x 226 mm

: 300 W

Documents & Downloads

User & Safety Instructions

User & Safety Instructions 510133 EA Elektro Automatik VRLA charger BC-512-21-RT 12 V Charging current (max.) 21 A

Circuit diagramm

Circuit diagramm 510133 EA Elektro Automatik VRLA charger BC-512-21-RT 12 V Charging current (max.) 21 A

Description

Powerful lead-acid battery charger for gentle and safer. The charger starts in constant-current operation (constant current mode).
If a cell voltage of approx. 2.37 V is reached, the timer and the charger switches over to constant voltage operation (Boost mode). After an hour switches the charger to trickle charging (standby mode). This decreases the voltage to the charging end voltage (2.3 V/Z). In this standby mode flow only a few mA. If the cell voltage, for example, by connecting an external load falls down under a certain value, the charging process starts again.

This text is machine translated.

Features

Connecting the battery with screw terminals and the attached charging cable with alligator clips
Gentle charging of batteries by charging IUU3
Display of charge state on LEDs (RED = Battery empty, ORANGE = half full battery , GREEN = Battery full)
Automatic shutdown with automatic reset after cooling of the equipment for the temperature protection of the devices. Fixed voltage power supplies: the most modern switching power supply technology
Outputs with screw terminals for fixed installation
Short circuit and overload protected. General Features: Wide input voltage range (90 to 264 V)
Power supply via enclosed (Schuko) power cord and built in the device IEC-320 socket
Suitable for wall mounting, and as a desktop unit
Cooling by natural convection
Overheating protection
Extremely robust