Electro PJP MgP6_6-IEC-CD1-BL L-mount 1 pc(s)
EAN:
Part number:
Item no:
Datasheet (PDF)
Quantity (Piece(s))
Savings
Package size (plus VAT.)
1
-
€ 10.92
3
6% = € 0.61
€ 10.31
Volume discounts vary depending on the seller
You save € 0.00
Number
Total (€ 10.92 / piece)
€ 10.92
plus VAT.
Technical specifications
- Product type
L-mount
- Reading category
CAT III 1500 V
CAT IV 1000 V
- Type
MgP6_6-IEC-CD1-BL
Documents & Downloads
Datasheet
Datasheet 3162012 Electro PJP MgP6_6-IEC-CD1-BL L-mount 1 pc(s)
User & Safety Instructions
User & Safety Instructions 3162012 Electro PJP MgP6_6-IEC-CD1-BL L-mount 1 pc(s)
Description
To connect measuring devices to RCD, RCCB, GFCI, circuit breakers, etc. without loosening their screws (the screws must be made of iron or steel). For the production of secure semi-permanent (several hours) connections between 4 mm banana plugs and the iron or steel screws of RCD-, RCCB-, GFCI-, circuit breaker terminals etc., without loosening them. The magnetic tip allows this adapter to "stick" to the screws or other electrical contacts that are made of steel or iron or nickel (ferromagnetic materials) to a large extent. Typically attached to the screws of some circuit breakers, residual current circuit breakers. The magnetic strength depends on the shape and material of the contact. The magnetic strength is lower for a steel screw with lens head than for a steel screw with flat head. Therefore, it is important that the contact is at the bottom of a cavity with an internal diameter equal to or greater than 6.7 mm but close to 6.7 mm.
This text is machine translated.
This text is machine translated.
Features
- Ø4mm Plug connection
- Magnetic angle adapter
- 1500V CATIII / 1000V CAT IV.
- 4 A
Hints
Protective finger protection. Always hold behind the finger guard for a safe operation of the angle adapter. The adapters are designed for a connection of only a maximum of a few hours, no permanent connection.