Eltako ER61-UC Relay Nominal voltage: 230 V Switching current (max.): 10 A 1 change-over 1 pc(s)
EAN:
Part number:
Item no:
Product type
Relay
Contact type
1 change-over
Nominal voltage
230 V
Switching voltage (max.)
250 V AC
Switching current (max.)
10 A
Number
Total (€ 47.05 / piece)
€ 47.05
plus VAT.
Technical specifications
- Product type
Relay
- Type
ER61-UC
- Connection
Screw terminal
- Factory colour
Multicolour
- Contact type
1 change-over
- Nominal voltage
230 V
- Switching voltage (max.)
250 V AC
- Switching current (max.)
10 A
- Max. switching capacity
2000 W
- Width
20.0000 mm
- Height
90.0000 mm
- Dim
(W x H x D) 20.0000 x 90.0000 x 70.0000 mm
- Content
1 pc(s)
- Weight
46.00
- Depth
70.0000 mm
Flush mounted (plaster)
Partially electronic
18 mm
10 A
0
12-230 V
AC/DC
50-50 Hz
AC
250-250 V
4 A
2000 W
1000 VA
1000 VA
500 VA
0
0
1
- UKCA
not relevant
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 2162230 Eltako ER61-UC Relay Nominal voltage: 230 V Switching current (max.): 10 A 1 change-over 1 pc(s)
Conformity certificate
Conformity certificate 2162230 Eltako ER61-UC Relay Nominal voltage: 230 V Switching current (max.): 10 A 1 change-over 1 pc(s)
Description
Switching relay UC. 1 changeover contact potential-free 10A/250V AC, light bulbs 2000W. No standby loss. For installation and AP-mounting. 45 mm long, 45mm wide, 18mm deep. The latest hybrid technology combines the advantages of wear-free electronic control with the high power of special relays. Universal control voltage 8..230V UC. Very low switching noise. By using a bistable relay, there is no coil power loss and no heating thereby even when the relay is switched on. The relay contact can be open or closed during commissioning and synchronizes itself during the first operation. This relay is not suitable for feedback with the switching voltage of a dimmer switch. Only use relays ESR12DDX-UC, ESR12NP-230V+UC or ESR61NP-230V+UC for this purpose. The electronics have no own power supply and therefore no standby loss. Only when the control contact is closed is the micro-controller activated, which switches the bistable relay in the right direction. When the control contact is opened or the control voltage drops, it is switched back.
This text is machine translated.
This text is machine translated.