Eltako 30014062 Rail mounted PSU (DIN) 1 A 12 W No. of outputs:1 x Content 1 pc(s)
EAN:
Part number:
Item no:
Number
Total (€ 34.45 / piece)
€ 34.45
plus VAT.
14-day return policy included
Technical specifications
- Product type
Rail mounted PSU (DIN)
- Min. input voltage
230 V AC
- Output voltage
12 V
- Input voltage (max.)
230 V AC
- Max. output current
1 A
- Output current (max.) - rounded
1 A
12 W
- No. of outputs
1 x
- Connection
Screw terminal
- Dim
(L x W x H) 58 x 18 x 58 mm
- Weight
0
- Output voltage (max.)
12 V
- Output voltage (min.)
12 V
- Manufacturer part #
30014062
- Content
1 pc(s)
- PSU features
Adjustable voltage output
Regulated
- Width
18 mm
- Height
58 mm
- Length
58 mm
IP20
- Type
FSNT14-12V/12W
18 mm
58 mm
58 mm
18 mm
TRUE
1
AC
12 W
TRUE
Screw connection
TRUE
FALSE
TRUE
IP20
12-12 V
FALSE
230-230 V
TRUE
1 A
12 V
- UKCA
yes
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 2162187 Eltako 30014062 Rail mounted PSU (DIN) 1 A 12 W No. of outputs:1 x Content 1 pc(s)
User & Safety Instructions 2162187 Eltako 30014062 Rail mounted PSU (DIN) 1 A 12 W No. of outputs:1 x Content 1 pc(s)
Description
Switched PSU Stand-by loss only 0.2 watt. If the total power requirement of a Baureihe14 bus system is higher than 8W, further switching power supplies are required. These must not be connected in parallel, but supply a group of actuators each, which are separated by a separation bridge on the FSNT14. The delivery includes 1 separating bridge TB14 1 TE, 1 jumper 1.5 TE and a spacer DS14. At a load greater than 50% of the rated power and always with switched-mode power supplies and dimmers lying next to each other, a 1/2 division unit ventilation distance with the spacers DS14 is required. This and a long jumper are included. Efficiency 83% Stabilized output voltage ±1%, low ripple. Short-circuit-proof. Overload and over-temperature protection by switching off with automatic switching on after troubleshooting (auto-recovery function). This switching power supply can also be used to create redundancy. For this purpose, only 1 FSNT14 may be connected in parallel to the integrated power supplies in the FAM14 and FTS14KS and connected with a normal jumper. The FSNT14 should be placed next to the last actuator in the bus for optimum load distribution.
This text is machine translated.
This text is machine translated.