Enda ATC9311-FE-400-230 Temperature controller J 0 up to +400 °C 2 A relay (L x W x H) 50 x 96 x 96 mm
EAN:
Part number:
Item no:
Product type
Temperature controller
Operating voltage
230 V AC
Max. temperature reading
+400 °C
Outputs (thermostats)
2 A relay
No. of relay outputs
1
Number
Total (€ 68.90 / piece)
€ 92.44
-25 %
€ 68.90
plus VAT.
Technical specifications
- Scale resolution: 5°C
- Display: ± 0.5% v.
- Resolution: 1 °C
- Power consumption: 4.3 VA
- Operating temperature 0 °C - 50 °C
- Screw terminal strip for 2.5 mm². Outputs: Type ATC9311: 1 relay for heating current monitoring (changeover contact) Switching power 2 A/250 V AC with resistive load.
- Product type
Temperature controller
- Type
ATC9311-FE-400-230
- Operating voltage
230 V AC
- Reading range
0 up to +400 °C
- Max. temperature reading
+400 °C
- Min. temperature reading
0 °C
- Outputs (thermostats)
2 A relay
- No. of relay outputs
1
- Outputs
1x relay
- Dim
(L x W x H) 50 x 96 x 96 mm
- Height
96 mm
- Length
50 mm
- Width
96 mm
- Sensor type
J
- Manufacturer part #
ATC9311-FE-400-230
- Recess depth
50 mm
- Mounting type
Recess-mount
- Assembly dimensions
90.5 x 90.5 mm
- Sensor type
thermocouple FeCuNi type J
- Output
1 rel.
- Mounting depth
50 mm
- Operating voltage
230 V/50 - 60 Hz (+15 - +20 %)·
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 184958 Enda ATC9311-FE-400-230 Temperature controller J 0 up to +400 °C 2 A relay (L x W x H) 50 x 96 x 96 mm
Description
Low-cost analogue/digital temperature controller with "ON-OFF" or proportional band switching behaviour (as the set-point temperature is approached, the switched time becomes shorter and shorter in order to keep any overshoot as low as possible). The set-point is adjusted via a rotary dial on a 0 to 400 °C scale. The actual value is shown on a 3- digit 7-segment display. If the sensor circuit is interrupted, the relay will not be actuated.
Features
- Measuring input for thermocouple Fe-CuNi type J
- Scale range: 0 - 400 °C
- Scale resolution: 5 °C
- Display: ±0,5 % of measurement range
- Resolution: 1 °C
- Power consumption: 4.3 VA
- Operating temperature: 0 - 50 °C
- Screw terminal strip for 2.5 mm². Outputs: Type ATC9311: 1 relay for heating current monitoring (changeover contact) Switching power 2 A/250 V AC with resistive load.