FD2G71L-230V Eltako DALI gateway

Radio DALI2 gateway, bi-directional. Standby loss 2 watt. For example, mounting in suspended ceilings and lamps. 252mm long, 46mm wide and 31mm high. With cable strain relief. 230V supply voltage at terminals N and L. 16 V DC/130 mA are provided at terminals DALI +/- for up to 64 DALI devices. The FDG71L gateway controls DALI devices with EnOcean radio transmitters. Groups 0-15 can be activated and the broadcast command can also be issued. The DALI scenes 0-15 can also be controlled. DALI installations that are to be fully controlled with the FDG71L must therefore be configured in groups 0-15. The FGD71L internally stores the dimming value for each of the groups 0-15 and provides this value as a feedback signal. The same feedback frames are generated as with a FUD71. The responses of the device addresses correspond in ascending order to the dimming values of DALI groups 0-15. With PCT14, the feedback signals can be changed individually per group from dimming value message frame (%) to button message frame (ON/OFF). Thus, actuators can be controlled with the feedbacks. The FDG71L performs the functions of the DALI master and DALI power supply. Caution: Radio buttons always require a double click when programming into the FDG71L manually! With CLR, one click is all it takes. A direction button or universal button with the same ID and button cannot be taught in to different groups several times. The last selected group is always valid. A button can switch either only one group or all groups with broadcast. One FBH can also be taught per group. With manual memorizing, it is always brightness-independent. With PCT14 you can also set the brightness threshold. For the FBH of all groups, the delay time for the shutdown after non-motion can be set together in minutes (1..60). Default is 3 minutes.

This text is machine translated.