FIAP 2512 PVC Kleber 1000 ml PVC glue 1 l

FIAP PVC ACTIVE Primers are specially manufactured for bonding PVC products. The adhesive can withstand an operating pressure of up to 16 bar.It should be noted during the application that the area to be glued must first be treated by a PVC cleaner. Fine cleaning is carried out with FIAP PVC ACTIVE Cleaner. To do this, white lint-free pulp paper is soaked with a cleaner and the dry, adhesive surfaces are thoroughly cleaned to make them grease and free of dirt. After each cleaning processThe paper must be replaced. After cleaning, the FIAP PVC ACTIVE Primer can now be applied and the pipe should be inserted into the mold with a slight rotation so that no air bubbles are produced in the adhesive. This process is also known as cold welding. After gluing, the parts should be briefly fixed and not mechanically stressed in the following 5 minutes. After about 24 hours, the adhesive has completely hardened and can then be subjected to a pressure test.Resistance:The glues are waterproof. The chemical resistance of the gluings, especially in the case of inorganic acids, depends on the tube tolerances, setting times, pressure stresses, temperatures, the acid type and the acid concentration.Processing Note:Preparation of the adhesive surfacesThe ends of the pipe must be separated at right angles, inclined and deburred. In the event of a missing or incorrect pipe slope, a permanently tight connection cannot be achieved.

This text is machine translated.