Finder SSR 77.31.9.024.8070 30 A Switching voltage (max.): 480 V AC Zero crossing 1 pc(s)
EAN:
Part number:
Item no:
Packaging type
Piece
Product type
SSR
Control voltage (max.)
24 V DC
Switching voltage (max.)
480 V AC
Current load (max.)
30 A
Datasheet (PDF)
Number
Total (€ 77.30 / piece)
€ 77.30
plus VAT.
Only 6 Piece(s) available
Highlights & Details
Electronic relay (SSR), series 77
Technical specifications
- Switch-on current: (10 ms) 520 A
- Packaging type
Piece
- Product type
SSR
- Type
77.31.9.024.8070
- Switching type
Zero crossing
- Control voltage (max.)
24 V DC
- Control voltage range
24 V DC (max)
- Surge current (max.)
520 A
- Switching voltage (min.)
48 V AC
- Switching voltage (max.)
480 V AC
- Current load (max.)
30 A
- Max. switching capacity
6000 W
- Output voltage (max.)
480 V AC
- Contact type
1 maker
- Min. temperature
-20 °C
- Max. temperature
+80 °C
IP20
- Width
22.5 mm
- Height
83.3 mm
- Depth
120.3 mm
- Permanent current (max.)
30 A
- Content
1 pc(s)
- Nominal current (details)
5 A
- Switching voltage
48 - 265 V AC
- Dielectric strength
5 kV
- Ambient temperature
-20 - +70 °C
Documents & Downloads
Datasheet
Datasheet 430021 Finder SSR 77.31.9.024.8070 30 A Switching voltage (max.): 480 V AC Zero crossing 1 pc(s)
User & Safety Instructions
User & Safety Instructions 430021 Finder SSR 77.31.9.024.8070 30 A Switching voltage (max.): 480 V AC Zero crossing 1 pc(s)
Information
Information 430021 Finder SSR 77.31.9.024.8070 30 A Switching voltage (max.): 480 V AC Zero crossing 1 pc(s)
Description
Modular, for 35 mm DIN rails. AC output circuit (anti parallel thyristors), high number of switching cycles (no burning of contact material), noiseless switching and low control capacity.
Design zero-voltage switching: Reduced switch-on current by switching in zero point - particularly suitable for lamp loads (especially energy-saving bulbs) for switching group of lamps and inductive loads and capacities.
Design instant switching: wear-free switching at high switching frequency and higher loads - particularly suitable for resistance loads and inductive loads.
This text is machine translated.
Design zero-voltage switching: Reduced switch-on current by switching in zero point - particularly suitable for lamp loads (especially energy-saving bulbs) for switching group of lamps and inductive loads and capacities.
Design instant switching: wear-free switching at high switching frequency and higher loads - particularly suitable for resistance loads and inductive loads.
This text is machine translated.
Hints
Approvals: CE.