1/4
Fischer 562952 FPF II CTF 10,0 x 280 BC 50 Wood screw 10 mm 280 mm TX Steel zinc galvanized 50 pc(s)
EAN:
Part number:
Item no:
Highlights & Details
FPF II CTF 10.0 X 280 BC 50
- Drive: TX50Thread length 260 [mm]Head-Ø 18.0 [mm]Length 280 [mm]Type: Fully threaded screw
Technical specifications
- Product type
Wood screw
- Drive
TX
- Material
Steel
- (Ø)
10 mm
- Length
280 mm
- Head shape
Countersunk
- Dim
(Ø x L) 10 mm x 280 mm
- Content
50 pc(s)
- Material properties
zinc galvanized
- UKCA
not relevant
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 2789496 Fischer 562952 FPF II CTF 10,0 x 280 BC 50 Wood screw 10 mm 280 mm TX Steel zinc galvanized 50 pc(s)
Description
The fischer Premium full-thread bolt powerfull II is a wood screw which is approved in addition to the usual coniferous wood and also for processing in hardwood. The powerfull II in diameter 10 mm differs from the diameters 6 and 8 mm in geometry. The 10mm screw has a drilling tip which produces a pre-drilling effect and does not allow the long screws to run.The risk of splitting is reduced and the turning torque is reduced. In addition, there are small margins and axle distances. The European Technical Assessment guarantees an additional level of safety.
This text is machine translated.
This text is machine translated.
Features
- The point geometry provides for a quick turning in and reduces the gap behavior on the underground. The powerfull II in diameter 10 mm differs from the diameters 6 and 8 mm in geometry. The 10 mm screw has a drill tip that produces a pre-drill effect and does not let the long screws run. The risk of fission is reduced and the tightening torque is reduced. The screw geometry significantly improves the pull-out capacity and provides for an optimization of the screw-in torque. Peak geometry makes for fast spin-in and low gap behavior. The countersunk head can be used for attaching metal parts to wood. Due to the screw geometry, very good technical values such as pull-out capacity, screw-in torque. The 10 mm screw has a drill tip that produces a pre-drill effect and does not let the long screws run.