FTS14TG Eltako RS485 Gateway DIN rail

Pushbutton gateway for FTS14 systems. Stand-by loss only 1.3 watts. Connection to the Eltako RS485 bus. Cross-wiring bus and power supply with jumper. Operation in conjunction with FAM14 or FTS14KS. For better heat dissipation, a ½ division unit ventilation distance must be maintained on the left-hand side; use the enclosed spacer DS14 for this purpose. Supply voltage 230V. With up to 3 FTS14TG push-button gateways, the telegrams of up to 90 can be fed in via a 2-wire push-button bus connected 4-way bus buttons B4T65 and B4FT65 or bus push-button couplers FTS61BTK and FTS61BTKL with the conventional buttons connected to them. Data transfer and power supply are carried out simultaneously via only 2 wires. This eliminates the need for numerous individual button control cables. A FTS14EM may not be required. Up to 30 B4T65, B4FT65, FTS61BTK and FTS61BTKL can be connected to a FTS14TG button gateway. The 2-wire bus supplies power to the connected devices with 29V DC and simultaneously transfers data. Please use only common bus or telephone lines. The 2-wire bus is electrically isolated from the Eltako RS485 bus. The total permissible cable length is 200m. The RLC link supplied with the FTS14TG must also be connected to the BP and BN terminals on the bus pushbutton or bus pushbutton coupler that is furthest away. With an FTS14FA in the Eltako RS485 bus, the key telegrams of the connected devices are also sent to the Eltako­Gebäudefunk.

This text is machine translated.