Gossen Metrawatt M513R PROFITEST EMOBILITY Test adapter 1 pc(s)
EAN:
Part number:
Item no:
Datasheet (PDF)
3 Piece(s)
Sales and shipping:
Number
Total (€ 2,415.97 / piece)
€
Only 3 Piece(s) available
Highlights & Details
Charging cable test adapter PROFESSIONAL TEST EMOBILITY
- Testing of 1- and 3-phase E-charging cables mode 2 and 3
- Function or trigger testing by simulating the following error event: Open, head of exchange and PE at phase
- Measurement of the earthing conductor current with current transformer is available as an accessory.
- Measurement of earthing conductor and insulation resistance according to DIN VDE 0701-0702 at the PROFITEST MXTRA/MTECH +
- Trigger testing with nominal fault current and measurement of the tripping time with the PROFITEST MXTRA/MTECH +
- Assessment and logging of the individual test steps with the PROFITEST MXTRA/MTECH +
Technical specifications
- Height
307 mm
- Length
173 mm
- Width
401 mm
- Compatible with
Gossen Metrawatt
- Reading category
CAT II 300 V
- Type
PROFITEST EMOBILITY
- Weight
6.4 kg
- Product type
Test adapter
Documents & Downloads
Datasheet
Datasheet 1784022 Gossen Metrawatt M513R PROFITEST EMOBILITY Test adapter 1 pc(s)
User & Safety Instructions
User & Safety Instructions 1784022 Gossen Metrawatt M513R PROFITEST EMOBILITY Test adapter 1 pc(s)
Description
Adapter for standard testing of 1- and 3-phase charging cables mode 2 and 3 by simulation of error cases according to DIN VDE 0701-0702, as well as manufacturer.
The PROFESSIONAL TEST E-Mobility is an adapter for standard testing of 1- and 3-phase charging cables mode 2 and 3 by simulation of error cases according to DIN VDE 0701-0702, as well as manufacturer.
The PROFESSIONAL TEST E-Mobility makes your investment decision easy, because with the perfectly suited to the needs of accessories and you can 1- and 3-phase charging cable mode 2 and 3 in accordance with DIN VDE 0701-0702, as well as manufacturer information quickly and safely conforms to standards must be checked.
This text is machine translated.
The PROFESSIONAL TEST E-Mobility is an adapter for standard testing of 1- and 3-phase charging cables mode 2 and 3 by simulation of error cases according to DIN VDE 0701-0702, as well as manufacturer.
The PROFESSIONAL TEST E-Mobility makes your investment decision easy, because with the perfectly suited to the needs of accessories and you can 1- and 3-phase charging cable mode 2 and 3 in accordance with DIN VDE 0701-0702, as well as manufacturer information quickly and safely conforms to standards must be checked.
This text is machine translated.
Features
- Audit of E-charging cables according to DIN VDE 0701-0702, as well as indicated by the manufacturer through a guided test sequence with a recommended testing device
- Check the charging cables of the types of mode 2 and 3
- Check the connection cables with country specific charging plug (type 1, etc.)
- Function or trigger testing by simulating the following error event: Open, head of exchange and PE at phase
- Measurement of the earthing conductor current with current transformer is available as an accessory.
- Measurement of earthing conductor and insulation resistance according to DIN VDE 0701-0702 with a recommended testing device
- Trigger testing with nominal fault current and measurement of the tripping time with a recommended testing device
- Assessment and logging of the individual test steps with a recommended testing device
- Simulation of the vehicle condition according to EN 61851-1/VDE 0122-1
- Check the resistance of coding for vehicle clutch and plug according to EN 61851-1/VDE 0122-1
- Uses:
- Test the effectiveness of protective measures at E-charging cables for electric and hybrid vehicles
- Technical characteristics:
- The following error cases can with the test adapter for the power supply of a charging cable can be simulated (even without additional testing device):
- Crossed wire
- The failure of a single conductor (undervoltage detection)
- External voltage on the protective conductor by activation of the phase on the protective conductor (PE UEXT switch position)
- The assessment of the response of the charging cable to the respective error case comes purely optical:
- ICCB active or inactive (signal lamp on the iccb)
- Signalling the error cases by LEDs on the test adapter
- The following additional tests are recommended when connecting a test device to the test adapter is possible:
- Individual measurements
- Measurement of the earthing conductor resistance of the charger cable by the function RPE on the test device
- Measure the insulation resistance of the charging cable by the function RISO on the test device
- Trip test of RCDs in the iccb with nominal fault current by the function if the test device
- Measurement of tripping time of RCDs in the iccb by the function IdN on the test device
- Measure the resistance coding
- Test sequences for the comfortable measuring and logging
- Two test sequences are in the corresponding test equipment factory:
- Charging cable Mode 2
- Charging cable Mode 3
- The tester takes you semi-automatically through all the test steps.
- Every test step is evaluated and assessed by the user (OK/not OK) for a later logging.
Scope of delivery
- 1 test adapter in case.
- 1 power supply cable
- 1 operating instructions