Ixxat 1.01.0067.44010 CAN-CR200 CAN repeater CAN bus 24 V DC 1 pc(s)
EAN:
Part number:
Item no:
Datasheet (PDF)
Number
Total (€ 399.16 / piece)
€ 399.16
plus VAT.
Only 7 Piece(s) available
CAN-CR 200
Technical specifications
- View: Transmission Process/defective segment (three duo-LEDs), Power (LED)
- CAN-Bus interface: ISO 11898-2 with CAN-reactor. Two Sub-D 9-ports and a Hutschienenbus. CAN-terminating resistors integrated (switchable).
- Baud rate up to 888 kbps
- Run delay: Approx. 200 ns (corresponds to approx. 40 m bus length)
- Galvanic uncoupling: 1 kV, 1 sec; CAN1, CAN2 and hutschienenbus are electrically isolated from each other
- Certification: CE, FCC
- Housing: plastic rail mount casing.
- Product type
CAN repeater
- Interfaces
CAN bus
- Type
CAN-CR200
- Operating voltage
24 V DC
- Max. operating temperature
70 °C
- Min. operating temperature
-20 °C
- Operating temperature
-20 up to 70 °C
- Dim
(W x H) 22.5 mm x 100 mm
- Max. current consumption
100 mA
- Height
100 mm
- Width
22.5 mm
- Manufacturer part #
1.01.0067.44010
- Plastic free packaging
Plastic-free packaging
Documents & Downloads
Datasheet
Datasheet 1386366 Ixxat 1.01.0067.44010 CAN-CR200 CAN repeater CAN bus 24 V DC 1 pc(s)
User & Safety Instructions
User & Safety Instructions 1386366 Ixxat 1.01.0067.44010 CAN-CR200 CAN repeater CAN bus 24 V DC 1 pc(s)
Description
ISO 11898-2 CAN repeater with series connection capability
The CAN-CR 200 is used for galvanic isolation of two segments of a CAN network and for setting up star or tree topologies. The CAN-CR 200 is modular and can be combined to form a "star coupler". The connection is done via a Hutschienenbus. As a special feature separates the Repeater a defective segment from the rest of the network, so that the remaining network can work. After remedying the fault, the segment again automatically to the network.
The galvanic isolation is both for the CAN-segments as well as for the supply voltage.
This text is machine translated.
The CAN-CR 200 is used for galvanic isolation of two segments of a CAN network and for setting up star or tree topologies. The CAN-CR 200 is modular and can be combined to form a "star coupler". The connection is done via a Hutschienenbus. As a special feature separates the Repeater a defective segment from the rest of the network, so that the remaining network can work. After remedying the fault, the segment again automatically to the network.
The galvanic isolation is both for the CAN-segments as well as for the supply voltage.
This text is machine translated.