Ixxat 1.01.0067.44400 CAN-CR220 CAN repeater CAN bus, D-SUB9 24 V DC 1 pc(s)
EAN:
Part number:
Item no:
Datasheet (PDF)
Number
Total (€ 508.40 / piece)
€ 508.40
plus VAT.
Highlights & Details
Can-CR220 ISO 11898-2 CAN repeater with 4 kV isolation voltage
- Protection of segments up to 4 kV
- DIN/EN 50178 (DIN VDE 0160: 1988-05 AND DIN VDE 0160/A1: 1989-04)
- Cost savings through simpler wiring
- Increased system reliability
- Very little effect on the real-time behavior of the system
Technical specifications
- Displays: Sending/defective segment (two Duo LEDs), power (one LED)
- Can bus interface: ISO 11898-2 with CAN throttle. Two sub-D9 connectors. Can terminating resistors integrated (switchable).
- Baud rate: Up to 1 Mbps
- Throughput delay: Approx. 200 ns (corresponds to approx. 40 meters bus length)
- Power supply: 9 - 32 V/DC, 1.5 W typ., via screw terminals
- Galvanic decoupling: Can 1, CAN 2 and power supply are electrically isolated from each other.
- Insulation voltage 1.01.0067.44400
- - 2.0 kV AC / 1 min.
- - 3.2 kV DC / 1 min.
- - 3.5 kV AC / 1 sec.
- - 4 kV DC / 1 sec.
- Insulation voltage 1.01.0067.44300
- - 3 kV AC / 3 min.
- - 3.75 kV AC / 1 min.
- - 4 kV DC / 1 min.
- - 4 kV AC / 1 sec.
- - 4 kV DC / 1 sec.
- Temperature range: -20 ºC ... 70 ºC
- Housing, dimensions: Plastic DIN rail housing, approx. 22.5 x 100 x 115 mm
- Product type
CAN repeater
- Interfaces
CAN bus
D-SUB9
- Type
CAN-CR220
- Operating voltage
24 V DC
- Dim
(W x H) 22.5 mm x 100 mm
- Max. current consumption
100 mA
- Height
100 mm
- Width
22.5 mm
- Manufacturer part #
1.01.0067.44400
- Plastic free packaging
Plastic-free packaging
Documents & Downloads
Datasheet
Datasheet 2497720 Ixxat 1.01.0067.44400 CAN-CR220 CAN repeater CAN bus, D-SUB9 24 V DC 1 pc(s)
User & Safety Instructions
User & Safety Instructions 2497720 Ixxat 1.01.0067.44400 CAN-CR220 CAN repeater CAN bus, D-SUB9 24 V DC 1 pc(s)
Description
CAN CR220
The CAN-CR220 is used for galvanic isolation of two segments of a CAN network and offers a particularly high insulation voltage of 4kV. It is therefore suitable for use in medical applications, for example. The repeater separates a defective segment from the rest of the network so that the remaining network can continue to work. After the fault has been rectified, the segment is automatically switched back on to the network.
Galvanic isolation is carried out for both the CAN segments and the supply voltage.
The CAN-CR220 is tested according to DIN/EN 50178 (DIN VDE 0160: 1988-05 and DIN VDE 0160/A1: 1989-04).
This text is machine translated.
Scope of delivery
- CAN CR220
- Quick guide