Kemo M079N Chaser light assembly kit Version: Assembly kit 3 V DC, 6 V DC
EAN:
Part number:
Item no:
Quantity (Piece(s))
Savings
Package size (plus VAT.)
1
-
€ 6.29
5
6% = € 0.38
€ 5.91
Volume discounts vary depending on the seller
You save € 0.00
Total (€ 6.29 / piece)
€ 6.29
plus VAT.
14-day return policy included
Highlights & Details
Indicators, alternating flasher, running light
Technical specifications
- Clock frequency: approx. 3 x per second (3 Hz)
- On-time per channel: approx. 76 ms
- Indicators: For 1 - 2 LEDs
- Alternating flasher: For 1 - 2 LEDs per channel
- Running light (3-channel): for 1 - 2 LEDs per channel.
- Product type
Chaser light assembly kit
- Operating voltage
3 V DC
6 V DC
- Channels
3
- Dim
(L x W) 10 mm x 18 mm
- Length
10 mm
- Width
18 mm
- Version
Assembly kit
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 1402121 Kemo M079N Chaser light assembly kit Version: Assembly kit 3 V DC, 6 V DC
Description
At 3 V operating voltage can only 1 LED per channel can be connected. At 6 V operating voltage, up to 2 LEDs per channel can be connected. Except for the blinking electronics are currently 2 capacitors and 2 resistors. Of the resistors is only one resistor is fitted, depending on the operating voltage. The two attached capacitors are connected according to drawing with the blinking electronics (solder). LEDs are not included. As the LEDs can be commercially available LEDs (red-green-yellow) can be connected and a operating current of 10 - 20 mA and a voltage between 1 - 2 V. Special colors such as blue and white have mostly an operating voltage of 2.5 - 3.5 V. If these are to be connected, then you can use per output only 1 LED connect and you need the Flash electronics with 6 V (3 V operating voltage is too low).
This text is machine translated.
This text is machine translated.
Hints
Caution: incorrect polarity to the operating voltage (plus and minus interchange) or incorrect operating voltage (too high voltage, connection of an AC voltage) will immediately destroy the M 079 N. In these cases, a warranty is not possible. Please never operate without the prescribed series resistor (this is inserted into the connection drawings)!