Buy Knipex 97 53 14 Crimper Ferrules 0.08 up to 16 mm²

Red and blue crimping pliers by Knipex, Model 97 53 14, manufactured in Germany.

Knipex crimping pliers with red and blue handles, suitable for crimping cable connections. The tool type and model number are visible.

A person is using a red and blue crimping tool to press a metal piece with a clip. The hand and tool are visible.

A red crimping pliers holds a blue cable. The pliers are shown in close-up, revealing the crimping mechanism in detail.

A person is holding a crimping tool about to process an electrical cable. The tool displays the marking 'KNIP'.

A person is using a red wire stripping pliers to work on the ends of two black cables. The pliers are removing the insulation.

A hand is holding a red and blue crimping pliers. A red cable is being inserted into the pliers to crimp a metal cable lug.

A hand is holding a red crimping pliers working on a wire with a metal connector.

A hand tool with a red and blue handle is gripping the end of a yellow insulated cable, suitable for electrical work.

A red and blue crimping pliers is crimping a yellow and green cable used for electrical connections.

A pair of red Knipex crimping pliers are being held in hand, ready to crimp a cable.

A hand is holding a crimping plier that is squeezing an electrical cable. The pliers are black and red, with a blurred background.

A pair of wire strippers crimping a yellow-green cable wire, close-up. Tool hinges and screw visible, background blurred.

Close-up of a bicycle crank bolt with a torque wrench set to 10 newton-metres, against a blurred background.

A hand holds a red crimping pliers against a blue cable. The pliers are positioned on a hexagonal connector.

A red and blue crimping pliers lie on a table, surrounded by cable lugs. A blurred electrical panel is visible in the background.

A hand is holding a red crimping plier that is working on a cable. In the background, an electrical cabinet with cables can be seen.

A hand is holding a red crimping pliers and clamping a metal connector with a cable in a technical laboratory or workshop environment.

A red and blue crimping pliers secures a yellow-green electrical cable end ferrule in a workshop.

A crimping plier presses cable connectors onto insulated wires. In the background, an electrical switchboard setup.

1/23

Datasheet (PDF)

215 Piece(s)

Do your needs go beyond this?

Sales and shipping:

Number

Piece(s)

Total (€ 130.24 / piece)

€

Report legal concerns

Highlights & Details

Self-setting crimping pliers for wire-end sleeves with side introduction

Lower grip widthReliable hexagonal pressing of wire end sleeves from 0.08 to 16 mm² (AWG 6) via reversing lever and all twin cable end sleeves up to 2 x 10 mm² (AWG 2 x 8)Hexagonal crimping for cramped connection dimensionsFor pressing of wire end sleeves DIN 46228 Part 1 + 4Self-adjusting to the desired core sleeve size

Technical specifications

Number of cavities: 1 pcs.

Product type: Crimper

Manufacturer part #: 97 53 14

Range of uses: Ferrules

Crimp area: 0.08 up to 16 mm²

Crimp area AWG: 8 up to 28 awg

Crimp area (min.): 0.08 mm²

Crimp area (max.): 16 mm²

Crimp area AWG (min.): 28 awg

Crimp area AWG (max.): 8 awg

Length: 180 mm

Material: Chromium-vanadium electric furnace steel

Material properties: burnished
tempered

Width: 75 mm

Height: 21 mm

Weight: 445

Factory colour: Multicolour

Type: ** Only with the introduction page

Suitable for: Wire-end sleeves

Type: 97 53 14**

UKCA: not relevant

Documents & Downloads

Datasheet

Datasheet 822459 Knipex 97 53 14 Crimper Ferrules 0.08 up to 16 mm²

User & Safety Instructions

User & Safety Instructions 822459 Knipex 97 53 14 Crimper Ferrules 0.08 up to 16 mm²

Description

97 53 14 Self-adjusting crimping pliers for wire-end sleeves with reduced grip. For pressing of wire end sleeves DIN 46228 Part 1 + 4 Self-adjusting to the desired core sleeve size. consistently high crimping quality through locking device (can be unlocked) Crimp-pressure is set precisely ex-factory (calibrated) Power strengthening through lever transmission for fatigue-free working High user comfort through handy design and low weight. Approved crimping according to UL in conjunction with the KNIPEX-AEH 97 99 330 – 399. UL approval in conjunction with KNIPEX-EH 97 99 330 – 399. Reliable hexagonal pressing of wire end sleeves from 0.08 to 16 mm² (AWG 6) using a changeover lever and all twin wire end sleeves up to 2 x 10 mm² (AWG 2 x 8). Hexagonal crimping for cramped connection dimensions. - Application: Wire end sleeves - Capacity square millimeters: 0.08 — 16mm² - Number of nests: 1 - AWG: 28 — 8.

This text is machine translated.