With the Lian Li 9.2-inch LCD kit you can upgrade your Lian Li O11 Vision-M to replace the middle divider in the housing and bring an integrated 9.2-inch LCD directly into the interior. Thus you use the area not only as a cover, but as clean place for system info, own graphics or animations - all this can be controlled comfortably via L-Connect 3.
Lian Li 9.2-inch LCD kit for the O11 Vision-M: Divider upgrade with integrated display
The kit replaces the middle divider panel in the O11 Vision-M and integrates the display at exactly the point where it makes the most visual sense. You don't have to adjust or improvise: The panel is clipped into the top of the housing and then screwed firmly with standard screws.
Installation and connection: Quickly mounted, connected via USB
The connection is made via USB. It allows power supply and image signal to be transmitted simultaneously. So you don't need separate cable paths, and the display is usually quickly connected to the PC.
Especially in a showcase housing like the O11 Vision-M the display appears as if it were part of the design right from the start - not like a subsequently used accessory.
Display data at a glance
The in-built LCD offers 1,920 x 462 pixels, runs at 60 Hz and achieves a top brightness of 500 nits. Contents are thus clearly recognizable and appear colorful.
The combination of resolution and 60 Hz provides for a clean picture and smooth animations. Thanks to 500 nits the content remains well visible - even in a lot of ambient light.
Lian Li L-Connect 3: Configure content freely
The LCD is fully compatible with Lian Li L-Connect 3. You can use templates or create your own profiles and thus define exactly how WAS is displayed - for instance live system values, own pictures or animations. Alternatively, the display can also be used as second monitor.
Practical for everyday life: The display can switch to an offline mode and then shows the date and time further, even when the PC is shut down.
This text is machine translated.