Image similar
LUKAS-ERZETT A25041251402 LUKAS-ERZETT A25041251402 N/A 1 pc(s) 1 pc(s)
EAN:
Part number:
Item no:
Quantity (Piece(s))
Savings
Package size (plus VAT.)
1
-
€ 22.68
3
4% = € 0.98
€ 21.70
Volume discounts vary depending on the seller
You save € 0.00
Number
Total (€ 22.68 / piece)
€
Highlights & Details
LUKAS-ERZETT A25041251402 N/A 1 pc(s)
- Fasten the self-adhesive abrasive sheets securely
Technical specifications
- Tool holder: Internal thread
- M14 tool attachment
- n max. (1/min): 7600
- Stars: 2
- Cooling system: No ventilation
- Suitability Steel and cast steel RM up to 800 N/mm²: Suitable
- Application fine sharpening: Well suitable
- Application Remove paint: Suitable
- Suitable for steel: Suitable
- Content
1 pc(s)
- Dim
- Product type
Tool shank
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 3441022 LUKAS-ERZETT A25041251402 LUKAS-ERZETT A25041251402 N/A 1 pc(s) 1 pc(s)
Description
Fasten the self-adhesive abrasive sheets securely
Quick and easy installation without clamping wrench
Quick and easy installation without wrench thanks to integrated M14 thread
The LUKAS slider holder GTZ is ideal for securing the self-adhesive PSH sanding discs with LUKAS centering bore. The rear side of the sanding discs is covered with Velcro and the sanding discs are equipped with hook fabric. In addition, thanks to the integrated M14 thread, the tool can be mounted directly on the spindle of the machine or on a suitable shaft with external thread. Additional tools, such as a chuck wrench, are not required and you save an enormous amount of time. The specified maximum permissible speeds are valid for a maximum open shaft length L0 of 20 mm. For other deflection lengths, the maximum permissible speed must be calculated separately. The high-quality steel shaft of the tool fits optimally in the drive machine. Clamps, slip or even shaft breakage are a thing of the past.
This text is machine translated.
Quick and easy installation without clamping wrench
Quick and easy installation without wrench thanks to integrated M14 thread
The LUKAS slider holder GTZ is ideal for securing the self-adhesive PSH sanding discs with LUKAS centering bore. The rear side of the sanding discs is covered with Velcro and the sanding discs are equipped with hook fabric. In addition, thanks to the integrated M14 thread, the tool can be mounted directly on the spindle of the machine or on a suitable shaft with external thread. Additional tools, such as a chuck wrench, are not required and you save an enormous amount of time. The specified maximum permissible speeds are valid for a maximum open shaft length L0 of 20 mm. For other deflection lengths, the maximum permissible speed must be calculated separately. The high-quality steel shaft of the tool fits optimally in the drive machine. Clamps, slip or even shaft breakage are a thing of the past.
This text is machine translated.
System requirements
- Angle grinder
