1/6
Magigoo Magigoo 3D glue stick for PP-GF filaments 50 ml 2nd gen. Sonstiges 3D Drucker Zubehör MPPGF2018
EAN:
Part number:
Item no:
Datasheet (PDF)
Highlights & Details
Magigoo 3D glue stick for PP-GF filaments 50 ml 2nd gen.
- Especially for PP-GF materials
- Easy removal of adhesive residues
- Resistant to high temperatures
- This text is machine translated.
Technical specifications
- Type
Magigoo 3D glue stick for PP-GF filaments 50 ml 2nd gen.
- Product type
3D glue stick
Documents & Downloads
Datasheet
Datasheet 1933330 Magigoo Magigoo 3D glue stick for PP-GF filaments 50 ml 2nd gen. Sonstiges 3D Drucker Zubehör MPPGF2018
Security datasheet
Security datasheet 1933330 Magigoo Magigoo 3D glue stick for PP-GF filaments 50 ml 2nd gen. Sonstiges 3D Drucker Zubehör MPPGF2018
Signal word
Attention
GHS / H Statements
- H 319: Causes serious eye irritation
- H 317: May cause an allergic skin reaction
GHS / P Statements
- P 102: Keep away from children
- P 261: Avoid inhaling dust/fume/gas/mist/vapours/spray
- P 280: Wear protective gloves/protective clothing/eye protection/face protection
- P 302+352: SKIN CONTACT: Wash with soap and water
- P 305+351+338: CONTACT WITH EYES: Rinse cautiously with water for several minutes. Remove contact lenses if applicable/possible. Continue rinsing
- P 337+313: If eye irritation persists: seek medical advice
- P 501: Dispose of contents/container at …
Description
Magigoo is the magic glue stick for your 3D printing
at 3D printing is the adhesion of the first layer the greatest challenge, especially with materials such as ABS. Once the first layer sticks perfectly to the printing plate, then the rest of the print is only secondary.
Magigoo is an easy to use glue stick that ensures that the first layer also adheres perfectly to the printing plate. The magic only starts when the pressure is finished, because when the 3D pressure has cooled down, it can be easily removed from the pressure plate. Magigoo also prevents the infamous warping of larger objects, especially at the edges of the printing plate.
This text is machine translated.
at 3D printing is the adhesion of the first layer the greatest challenge, especially with materials such as ABS. Once the first layer sticks perfectly to the printing plate, then the rest of the print is only secondary.
Magigoo is an easy to use glue stick that ensures that the first layer also adheres perfectly to the printing plate. The magic only starts when the pressure is finished, because when the 3D pressure has cooled down, it can be easily removed from the pressure plate. Magigoo also prevents the infamous warping of larger objects, especially at the edges of the printing plate.
This text is machine translated.