Makita B-49074 B-49074 Carbide metal Masonry twist drill bit 5 mm, 6 mm, 8 mm, 10 mm, 12 mm SDS-Plus 1 pc(s)
EAN:
Part number:
Item no:
Product type
Masonry twist drill bit
Drill hole Ø
5 mm
6 mm
8 mm
10 mm
12 mm
Material
Carbide metal
Material suitability
Concrete
Stone
Working length
50 mm
100 mm
Quantity (Piece(s))
Savings
Package size (plus VAT.)
1
-
€ 15.12
3
5% = € 0.75
€ 14.37
Volume discounts vary depending on the seller
You save € 0.00
Number
Total (€ 15.12 / piece)
€ 15.12
plus VAT.
Technical specifications
- Working length 50 mm / 100 mm
- Recording system SDS-plus
- Double-sided drill: No.
- Diameter 5.0 / 6.0 / 8.0 / 10.0 / 12.0 mm
- Suitable for: Concrete, stone
- Length 110 - 160 mm
- With center drill bit: No.
- Shaft diameter: 10 mm
- Shaft with flat end: No.
- Product type
Masonry twist drill bit
- Drill hole Ø
5 mm
6 mm
8 mm
10 mm
12 mm
- Material
Carbide metal
- Material suitability
Concrete
Stone
- Working length
50 mm
100 mm
- Content
1 pc(s)
- Tool holder
SDS-Plus
- Shank Ø
10 mm
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 3349936 Makita B-49074 B-49074 Carbide metal Masonry twist drill bit 5 mm, 6 mm, 8 mm, 10 mm, 12 mm SDS-Plus 1 pc(s)
Description
HM drill set V-PLUS Ø 5 x 110mm and Ø 6/8/10/12 x 160mm with SDS-PLUS mounting in plastic box
HM Drill set V-PLUS for SDS-PLUS hammer with 2 Power breaker cutting edges for high speed drilling even in case of battery-operated hammer drills and an optimized drilling behavior in case of reinforcement hits. The centering tip enables precise drilling on smooth surfaces. The box contains: Ø 5 x 110mm and Ø 6/8/10/12 x 160mm.
This text is machine translated.
HM Drill set V-PLUS for SDS-PLUS hammer with 2 Power breaker cutting edges for high speed drilling even in case of battery-operated hammer drills and an optimized drilling behavior in case of reinforcement hits. The centering tip enables precise drilling on smooth surfaces. The box contains: Ø 5 x 110mm and Ø 6/8/10/12 x 160mm.
This text is machine translated.