1/3
Monacor SAM-2 Built-in amplifier 200 W
EAN:
Part number:
Item no:
Number
Total (€ 348.74 / piece)
€ 348.74
plus VAT.
Only 10 Piece(s) available
Technical specifications
- Music output power 4 ohms: 250WMAX
- Music output power 8 ohms: 180WMAX
- The non-linear distortion factor for the sine power: 70 dB
- Quiescent power consumption: 19 VA
- Standby-power consumption 6 VA
- The stand-by mode-delay: approx. 7 minutes
- Power supply 230 VWechsel/50 Hz/300 VA
- Cut-out: 155 x 340 mm required boxes
- Installation depth without front plate: 85 mm
- Automatic start-up
- Product type
Built-in amplifier
- Power per channel (4Ω)
200 W
- Power per channel (8Ω)
125 W
- Dim
(W x H x D) 185 x 370 x 90 mm
- Weight
5.75 kg
- Width
185 mm
- Height
370 mm
- Depth
90 mm
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 1332519 Monacor SAM-2 Built-in amplifier 200 W
Description
Features
- Impressive building blocks for the optimum bass the proven design of this active subwoofer module provides the high-quality transistor technology for a convincing warm sound of the built-in subwoofer box. Equipment and the processing of the modules leave nothing to be desired. SAM-1 and SAM-2 have great dynamics reserves. Active subwoofer module, 250WMAX, 125WRMS
- High-performance active component
- Subsonic filter 24dB
- Variable low-pass 50-150 Hz (18 dB)
- Semi-parametric Bass Boost (variable 30-50 Hz center frequency with infinitely variable increase up to 6 dB)
- Infinitely variable phase shift 0 to -180° to compromise room setup and adjustment
- Variable high-pass 50-150 Hz (12 dB) for bass relief of the sat-verstarkers and Sat-Lautsprecher
- Ground-lift switch from the studio technology against humming noise
- Various protection circuits against short-circuit, overheating and DC
- Perfect drive for bass up to 46 cm diameter
- VerarbeitungDer convincing sound and high-quality, active high-pass of the SAM-2 with its setting options can be comfortably for bass relief of the main loudspeakers and for sound optimization can be used. The prerequisite for this, however, is a regular pre-amplifier output (pre-out) in the system, as it partly in high-quality aufspaltbaren monitored is present (pre-out/Main-In) or how at vor-endstufenkombinationen or use of mixers automatically. Klang+Ton 02/2013 SPH-10 M, MSH-115 HQ, SR and SAM-2 in the kit 2 RBT connects you-95 DOT1a very nice to review system, already plays. . The adaptability of the kit is phenomenal and the adjustment possibilities almost infinite. . . Unbelievably suitable for everyday use, comes with every kind of music and is home theater-compatible. In our listening room staunten we not bad, as we the system to the test. The small speaker had there, as if you were the whole bass share. The Subwoofer simply wasn't. The tactics with the tile is full. . It jiggle nothing, although a powerful, powerful bass in the room. The satellites themselves playing with a corresponding portion of air and fine resolution.
- This text is machine translated.