PCE Instruments PCE-127/4P Viscosity cup 1 pc(s)

DIN immersion beaker for measuring viscosity / German standard DIN 53211 / Beaker made of anodized aluminum / also as a spout cupDIN outfeed cups are viscosity meters to determine the toughness of liquids. The spill cups are often used in industry and research laboratories. However, due to the shape of the measuring method, the determination is only made on low viscosity liquids, as if the viscosity is too high, the fluidity cannot flow through the nozzles. Therefore, liquids with newton behavior reflect the most accurate results in the spill cup. The viscosity can be determined based on the flow volume and the measured time that the liquid takes to run through the nozzle from the discharge cup. The start time starts when the liquid escapes at the bottom of the nozzle. Stop as soon as the liquid no longer flows evenly, or as the liquid breaks down. In addition, there are immersion cups that are suitable for quick measurement on site, they are only immersed in the measured material. As soon as you lift the cup out and the liquid escapes from the nozzle, you can start measuring the time. After completion of the measurement, it is absolutely necessary to clean the spout cup, since dried residues can falsify the next measuring result. Care should also be taken to ensure that no sharp and pointed tools are used for cleaning. Scratches and scrapes in the spout cup also have an effect on the result.

This text is machine translated.