1/5
PCE Instruments PCE-VA 20-SET Anemometer 0.2 up to 30 m/s
EAN:
Part number:
Item no:
Number
Total (€ 441.18 / piece)
€ 441.18
plus VAT.
Only 3 Piece(s) available
Highlights & Details
Anemometer PCE-VA 20-SET with volume flow hood
- Measurement of wind speed
- Measurement of temperature and humidity
- Dew point temperature and wet bulb temperature
- Volume flow hoods included
- Extreme value measurement
- Hold function
- Impeller Ø 100 mm
- automatic cut-off function
Technical specifications
- Measurement range - wind speed 0.2 ... 30 m/s Wind speed accuracy < 20 m/s: ±(1.5% MW + 0.3 m/s) > 20 m/s: ±(3% MW + 0.3 m/s) Measurement range air temperature -20 ... +60 °C Air temperature accuracy ±0.6 °C. Air temperature resolution 0.1 °C / °F. Measuring range of air humidity 0.1 ... 99.9 % r.F. Accuracy of humidity ±3 % r.h. (At 25 °C and 10...90 % r.F.) otherwise: ±5 % r.h.. Humidity resolution 0.1 % r.h. Response time temperature 60 seconds Response time air humidity 60 seconds LCD update 1 x per second Display of wet bulb temperature -20 ... +59.9 °C Dew point temperature display -5 ... +59.9 °C Display volume flow 0 ... 99999 m³/min. Resolution volume flow 0.1 m³/min (0...9999.9 m³/min) 1 m³/min (10000...99999 m³/min) Automatic power off after 20 minutes of inactivity Size LCD 32.5 x 54 mm (H x W) Power supply 4 x 1.5 V AAA batteries Operating conditions 0 ... +50 °C,< 80% r.h. Storage conditions -10 ... +50 °C,< 90% r.h. Dimensions 269 x 106 x 51 mm Weight approx. 200 g
- Product type
Anemometer
- Temperature reading range
-20 up to +60 °C
- Air flow rate
99999 m³/min
- Dim
(L x W x H) 269 x 106 x 51 mm
- Weight
200 g
- Temperature reading range (max.)
+60 °C
- Temperature reading range (min.)
-20 °C
- Air speed reading range (max.)
30 m/s
- Air speed reading range (min.)
0.2 m/s
- Width
106 mm
- Height
51 mm
- Length
269 mm
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 2452697 PCE Instruments PCE-VA 20-SET Anemometer 0.2 up to 30 m/s
Description
Anemometer with volumetric flow hood PCE-VA 20-SET Measurement of wind speed, volume flow, temperature, Humidity Dew point and wet bulb temperature / Backlight / 10 cm impeller diameter Extreme measurement / HOLD function / automatic shut-off The PCE-VA 20 anemometer in the set with volume flow hood is used to measure the flow rate and the volume flow in the area of maintenance of ventilation and air conditioning systems. In addition, the anemometer can measure climate parameters such as temperature and air humidity with its volume flow hood. The measuring device calculates the dew point (DP) and wet bulb temperature (WBT) from this. All measured and calculated parameters are shown by the anemometer with volume flow hood on the two-line LCD display. The upper part of the display shows the flow speed, air humidity and the mean value in the mean value mode. The lower display shows the temperature, volume flow, wet bulb temperature and dew point, depending on the measuring mode. For a better and faster measurement evaluation, the user can use the anemometer with a volume flow hood to perform a maximum, minimum and average measurement. The anemometer is powered by four 1.5 V AAA batteries. The anemometer with volume flow hood can be used mobile. In addition to the anemometer, the scope of delivery of this measuring set also includes 2 volume flow hoods that can be attached directly to the display unit. The volume flow hoods are suitable for measurements of the air mass at round and angular channel exits or entrances.
This text is machine translated.
This text is machine translated.
Scope of delivery
- 1 x anemometer PCE-VA 20
- 1 x volume flow hood round Ø 210 mm
- 1 x square volume hood 346 x 346 mm
- 4 x 1.5 V AAA batteries
- 1 x carrying case
- 1x user manual