PFERD TOOLS PGAS 10/120 V-HV 80101060 Pneumatic straight grinder 950 W
EAN:
Part number:
Item no:
Datasheet (PDF)
Highlights & Details
Compressed air pneumatic wheel grinder
- No dust swirling on the workpiece side;Thanks to the collet chuck holder, optimally suitable for the recommended shank tools;safe working by dead man switching;optimal for use in places difficult to access;
Technical specifications
- Exhaust outlet: RearSpeed: 12000 RPMCollet chuck Ø 6 mmHeight: 46 mmInner Ø Inlet air hose: 13 mmAir consumption (idle): 0.5 m³/min.Air consumption (at load): 0.9 m³/min.
- Product type
Pneumatic straight grinder
- Features
incl. accessories
950 W
- Length
503 mm
- UKCA
not relevant
Documents & Downloads
Datasheet
Datasheet 2632080 PFERD TOOLS PGAS 10/120 V-HV 80101060 Pneumatic straight grinder 950 W
User & Safety Instructions
User & Safety Instructions 2632080 PFERD TOOLS PGAS 10/120 V-HV 80101060 Pneumatic straight grinder 950 W
Description
The drive is equipped with a collet chuck tool holder for shank tools. The air outlet duct of the compressed air drive is located at the rear. The compressed air drive must be used with oil. The drive is equipped with a dead man circuit through the lever valve. The built-in centrifugal regulator ensures a constant pulling power. 1 m from and 2.5 m supply air hose with 1/2" external thread connection, 6 mm collet chuck, 2 clamping keys. Due to its extended design, the drive is optimally suitable for working in difficult accessible places.
This text is machine translated.
This text is machine translated.
Scope of delivery
- 2x clamping key
- 1x collet chuck 6 mm
- 1 m from and 2.5 m supply air hose