1/3
Raspberry Pi® M.2 HAT+ Suitable for: Raspberry Pi® 5 B
EAN:
Part number:
Item no:
Datasheet (PDF)
Number
Total (€ 11.76 / piece)
€ 11.76
plus VAT.
Raspberry Pi® M.2 HAS+
Highlights & Details
- Supports single-lane PCIe 2.0 interface (500 MB/s peak transfer rate)
- Supports devices using the M.2 M-Key Edge connector
- Supports devices with the 2230 or 2242 form factor
- Can supply connected M.2 devices with up to 3 A.
- Contains power and activity LEDs
- Meets Raspberry Pi HAT+ specification
- With 6 bits. Accessories for mounting and supporting M.2 peripherals
Technical specifications
- Operating temperature 0℃ to 50℃ (ambient)
- Product type
Raspberry Pi® add-on PCB
- Suitable for
Raspberry Pi® 5 B
- Length
56.5 mm
- Width
65 mm
- UKCA
yes
Documents & Downloads
Datasheet
Datasheet 3202919 Raspberry Pi® M.2 HAT+ Suitable for: Raspberry Pi® 5 B
User & Safety Instructions
User & Safety Instructions 3202919 Raspberry Pi® M.2 HAT+ Suitable for: Raspberry Pi® 5 B
Description
The Raspberry Pi M.2 HAS+ enables the connection of M.2 peripherals such as NVMe drives and AI accelerators to the PCIe 2.0 interface of the Raspberry Pi 5 and supports fast data transfer (up to 500 MB/s) to and from NVMe drives and other PCIe accessories.
The Raspberry Pi 5 Single-Lane PCI Express 2.0 interface is connected to a 16-pin FPC connector with a distance of 0.5 mm. The M.2 HAT+ M Key is a mechanical adapter card that converts between this connector and a subset of the M.2 standard. It supports devices that have the M.2 M Key Edge Connector in form factors 2230 and 2242. It can supply connected M.2 devices with up to 3 A.
The Raspberry Pi M.2 HAS+ corresponds to the Raspberry Pi HAS+ specification and is automatically detected by the latest Raspberry Pi software/firmware. It comes with a 16 mm stacking header and threaded spacers so it can be connected to a Raspberry Pi 5 with a built-in Raspberry Pi Active Cooler.
This text is machine translated.
The Raspberry Pi 5 Single-Lane PCI Express 2.0 interface is connected to a 16-pin FPC connector with a distance of 0.5 mm. The M.2 HAT+ M Key is a mechanical adapter card that converts between this connector and a subset of the M.2 standard. It supports devices that have the M.2 M Key Edge Connector in form factors 2230 and 2242. It can supply connected M.2 devices with up to 3 A.
The Raspberry Pi M.2 HAS+ corresponds to the Raspberry Pi HAS+ specification and is automatically detected by the latest Raspberry Pi software/firmware. It comes with a 16 mm stacking header and threaded spacers so it can be connected to a Raspberry Pi 5 with a built-in Raspberry Pi Active Cooler.
This text is machine translated.
Scope of delivery
- M.2 HAS+
- Ribbon Cables
- 16 mm stacking header
- Spacer with thread and screws
- Knurled screw
Hints
Raspberry Pi M.2 produced+ until at least January 2032.