Buy Renkforce RF-3374948 USB hub 3 ports USB type A, SD, microSD USB 3.0 5 GBit/s + built-in SD card reader, Aluminium casin

USB-C Hub with Ports: micro SD, SD and 3x USB 3.1. A black cable is connected on the left side.

Silver external hard drive with USB-C connection and black cable.

A woman sits smiling at the table, working on her laptop, with a glass of orange juice and a plate of muffins in front of her.

A laptop is connected to a USB hub, to which a mouse, an external storage device, and USB drives are connected.

Close-up of a USB-C connection with silver edges and visible pins in the centre.

A grey laptop is being charged with a charging cable via a USB-C port.

1/6

Fast track dispatch on Thu, 16 Jul

357 Piece(s)

Sales and shipping:

Conrad Electronic Terms & Conditions

Number

Piece(s)

Total (€ 21.00 / piece)

€ 21.00

plus VAT.

Report legal concerns

Highlights & Details

Renkforce 3-port USB 3.1 1st Gen hub with memory card reader for USB-C® computers

3 additional USB 3.1 (Gen 1) connections
Incl. SD & microSD card reader
Enables data transfer rates up to 5 GBit/s thanks to USB 3.1 Gen 1 (Super Speed+)
Elegant aluminium design
Bus-powered – no additional power supply necessary

Technical specifications

•Turn one USB-C Port into 3 USB 3.0 Ports •Up to 5 Gbps data speeds let you transfer an HD movie in seconds • Works with the latest computers and smart devices with USB-C ports
• USB 3.1 Type-C support positive and negative plug.
• Compact USB3.0 Card Reader Support SD and TF/Micro SD memory card
• Plug and Play, Hot-swappable
• Support overcurrent protection
•Compact aluminum design goes perfectly with the new MacBook and many other devices

Product type: USB hub

Cable specs: USB 3.0

Transfer rate (max.): 5 GBit/s

Port: 3 ports

Interfaces (output): USB type A
SD
microSD

No. of outputs: 5 x

Cable length: 0.50 m

Power supply (LOV): via USB
via PSU (optional)

Used at: External

Distributor/switch features: + built-in SD card reader
Aluminium casing

Factory colour: Silver

Width: 143 mm

Height: 17.7 mm

Depth: 36.5 mm

Weight: 90.4 g

Documents & Downloads

User & Safety Instructions

User & Safety Instructions 1687474 Renkforce RF-3374948 USB hub 3 ports USB type A, SD, microSD USB 3.0 5 GBit/s + built-in SD card reader, Aluminium casin

Description

Most laptops don't come with enough USB ports. This 3-port USB 3.0 hub adds three additional USB interfaces to your laptop or PC. Whether it's USB mouse, flash memory USB drive, or external hard drive - plenty of ports available whenevere you need them. The slimline design makes sure it doesn't get in the way means it's the perfect upgrade for your office.

Built-in Memory Card Reader
The hub also features a built-in memory card reader. Allows you to access data stored on SD and micro-SD cards via your PC and helps you you back up your most recent holiday saps quickly.

With USB-C® - Perfectly equipped for the future
Newer smartphones, tablets, and notebooks use the USB-C®™ connector to transfer data. With this USB-hub you can expand your device by three more USB-A-connections as well as a memory card reader. So you can continue to connect your existing peripheral devices and are ready for the future.

SuperSpeed+ USB 3.1
This useful hub comes with a stylish aluminum enclosure and isn't just an eyecatcher: Take your data up speed and connect USB hard disks, digital cameras or camcorders to your computer via USB 3.1. Rates of up to 5 Gbps enable the transfer of huge data files such as HD movies or hi-res photos within a few secords. From now on, you've got 10x the speed that you normally get from USB 2.0. Goes without saying that the hub is also backwards compatible with earlier USB versions.

Bus-powered
The USB hub is bus-powered means your PC or notebook supplies the juice. You do not need an additional power supply. If you connect several power-hungry devices, there is an additional power connection at the hub.

Works with any computer
The installation of the 3+2 port hub is very easy: Simply connect the hub with your computer. Whether Windows, Mac or Linux – the hub is automatically recognized and installed by every operating system. In order to be able to use the full speed, your computer should have a USB 3.1 interface.

This text is machine translated.