Rhodius 208732 RS28 Grinding disc Stainless steel, Steel 25 pc(s)

Suitable for machines: The Rhodius RS28 is a roughing disk (form 27) for angle grinders of all power classes. Material suitability: The Rhodius RS28 was specifically developed for the machining of stainless steel (VA steel, stainless steel), e.g. 1.4301 (X5CrNi18-10 or 304), steel (black steel also called structural steel, St37, S235JR, 1.0037 or carbon steel) and cast steel. The roughing disk RS28 is excellently suitable for chamfering, for welding seam preparation, for egalising welds and to break edges. It is also suitable for surface grinding. Construction and production: The disc is manufactured in accordance with EN 12413 and is safety tested and OSA certified. Every thousand discs are tested for safety at approximately double the speed at which they are used. It contains high-quality grinding grain (aluminum oxide known as corundum) and specially tuned phenolic resin as well as an armoring made of three full-surface glass fiber fabric layers. This roughing disk thus far exceeds the legally required lateral load of 290 N. Application: The RS28 convinces by its very high machining power and aggressiveness. The glass has a fine grain layer which makes it very easy to break out. Dimension: The RS28 grinding disc has a disc width of 7.0 mm and is available in diameters from 115 mm to 230 mm. Branches: This grinding disk is preferred in the locksmith's shop, in steel construction, in container and plant construction as well as in the piping construction. Note: The Rhodius grinding wheels for stainless steel are iron-free and sulfur-free. To prevent rust, however, you should never change back to stainless steel with the same grinding wheel.

This text is machine translated.