Rhodius 210657 Grinding disc Diameter 150 mm Bore diameter 22.23 mm Stainless steel, Steel, Die-cast 1 pc(s)

Machine suitability: The RHODIUS RS580 EXTENDED is a roughing disk (form 27) for angle grinders of all power classes including high frequency machines (HF) and compressed air machines. Material suitability: The RHODIUS RS580 EXTENDED was specifically developed for the machining of stainless steel (VA-steel, Inox), e.g. 1.4301 (X5CrNi18-10 or 304), steel (black steel also called structural steel, St37, S235JR, 1.0037 or carbon steel) and cast steel. The roughing disk RS580 EXTENDED is excellently suitable for chamfering, for welding seam preparation, for egalising welds and for plastering and/or egalying castings. Construction and production: The disc is manufactured in accordance with EN 12413 and is safety tested and OSA certified. Every thousand discs are tested for safety at approximately double the speed at which they are used. It contains high-quality and extremely aggressive ceramic grain (sintered corundum) and specially tuned phenolic resin as well as an armoring made from three full-surface glass fiber layers plus an additional smaller flange fabric. This roughing disk thus far exceeds the legally required side load of 290 N. Quality: The user receives the best RHODIUS tool in his category with the RS580 EXTENDED. RHODIUS Topline products stand for the highest level of performance and quality. Application: The RS580 EXTENDED impresses through its very high machining power and aggressiveness with high life span. The glass has a fine grain layer which makes it very easy to break out. Dimension: The RS580 EXTENDED grinding disc has a disc width of 7.0 mm and is available in diameters from 115 mm to 230 mm. Branches: This grinding disk is preferred in the locksmith's shop, in steel construction, in yards, in container and plant engineering as well as in pipe and pipe construction. Note: The RHODIUS roughing wheels for stainless steel are iron-free and sulfur-free. To prevent rust, however, you should never Norma change back to stainless steel with the same grinding wheel.

This text is machine translated.