Rhodius 304093 Diamond cutting disc 150 mm 1 pc(s) Concrete
EAN:
Part number:
Item no:
Datasheet (PDF)
Quantity (Piece(s))
Savings
Package size (plus VAT.)
1
-
€ 14.28
3
6% = € 0.79
€ 13.49
Volume discounts vary depending on the seller
You save € 0.00
Number
Total (€ 14.28 / piece)
€ 14.28
plus VAT.
Only 5 Piece(s) available
Highlights & Details
Rhodius DG70, diamond cut-off wheel 150 x 10.0 x 2.0 x 22.23 mm, straight, ALPHANINE, for Beto N
- Good value for money
- Wet and dry cut
- Sintered
Technical specifications
- Segment height 7.0 mm
- Product type
Diamond cutting disc
- Content
1 pc(s)
- (Ø)
150 mm
- Type
Disc
- Bore Ø
22.23 mm
- Thickness
2 mm
- Rotational speed (max.)
10200 U/min
- Material suitability
Concrete
- Dim
(Ø) 150 mm
Documents & Downloads
Datasheet
Datasheet 3393902 Rhodius 304093 Diamond cutting disc 150 mm 1 pc(s) Concrete
User & Safety Instructions
User & Safety Instructions 3393902 Rhodius 304093 Diamond cutting disc 150 mm 1 pc(s) Concrete
Description
With the DG70 the user receives an attractive tool for Beto n, which convinces with a good price-performance ratio. Suitable for wet and dry cut.
Machine suitability: The diamond cutting disc DG70 is suitable for manual use with the angle grinder. It can play its full strengths on machines of all performance classes, including low-drive machines and battery machines.
Material suitability: The DG70 has been specifically developed for the machining of Beto n and plaster clinker.This RHODIUS quality tool is also very suitable for machining of hard rock and pavement, Beto pipes and curbstones.
Construction and production: The DG70 has a segmented cutting edge. Thus a very high cutting speed with simultaneous maximum service life is achieved. The tool is tested according to EN13236 and OSA and can be used in wet cut and also in dry cut. Owing to the high-quality industrial diamonds the DG70 is especially powerful. The disc is sintered directly.
Dimensions: This diamond cutting disc is available in diameters from 115 mm to 230 mm.
This text is machine translated.
Machine suitability: The diamond cutting disc DG70 is suitable for manual use with the angle grinder. It can play its full strengths on machines of all performance classes, including low-drive machines and battery machines.
Material suitability: The DG70 has been specifically developed for the machining of Beto n and plaster clinker.This RHODIUS quality tool is also very suitable for machining of hard rock and pavement, Beto pipes and curbstones.
Construction and production: The DG70 has a segmented cutting edge. Thus a very high cutting speed with simultaneous maximum service life is achieved. The tool is tested according to EN13236 and OSA and can be used in wet cut and also in dry cut. Owing to the high-quality industrial diamonds the DG70 is especially powerful. The disc is sintered directly.
Dimensions: This diamond cutting disc is available in diameters from 115 mm to 230 mm.
This text is machine translated.
Scope of delivery
- 1 pieces DG70 150 x 10.0 x 2.0 x 22.23 mm